Craftsman Grassbag Asm, Part 664-04115
I have a "like new" Craftsman Grassbag Asm, Part 664-04115 that I'm happy to sell if anyone needs it.
Latest Discussions: LAWN & GARDEN
pallet projects
plans for shed or greenhouse made from pallets
2
answersupdated about 1 year ago by BV015271
44024 and 44035
The wind blew our Smart Shed door open and broke three hinges. We need three each of parts 44024 and 44035. Please contact al2n9@aol.com
0
answersupdated about 1 year ago by BV015229
Does this air coil look normal?
Took a look at an a/c coil above a new furnace and took a picture.
1
answersupdated about 1 year ago by Climateengineersflorida
how do I get rid of raccoons?
raccoons and my new grass lawn...they are digging it up
0
answersupdated about 1 year ago by BV015168
Problem with new Paverstone install
So we're 90% complete with a big front-yard landscape project which included a paverstone driveway, walkways and landscape. This is being done by a reputable land...
0
answersupdated about 1 year ago by BV015101
Plastic screws for "thinking outside" storage building
I recently bought a used thinking outside building and have it erected. However, I need at least 6 additional screws for it. I had to borrow from various areas ...
6
answersupdated about 1 year ago by BV015082
Manual for older craftsman snowthrower 536 906000
Dose anyone have a copy of the manual for 536 906000. I need to change the augar belts and can't seem to find any info about this.
3
answersupdated about 1 year ago by BV015046
Moss
How do I get rid of MOSS in the flower beds?? and yard?
1
answersupdated over 1 year ago by margaretlouise
contest
Where/how do you find out who wins contests?
5
answersupdated about 1 year ago by Power Saw Stu
Eliminating Carpenter, Leafcutter, and Odourous House Ants Nest
I have finally found the probable primal nest under my front redwood deck, which they have laid to waste, but they're not active right now. According to my resear...
0
answersupdated about 1 year ago by BV015031
pt2 wood fence different grades
A fence contractor is replacing my old fence on my yard but 10% of the wood pickets are warped and some very knotty. Are there different quality grades within PT2...
0
answersupdated about 1 year ago by BV015026
Thinking outside shed
I'm needing instructions and parts for thinking outside deluxe shed Part 44025
1
answersupdated about 1 year ago by BV015015
Raking up Cedar Leaves
Our neighbors have a 75 foot Cedar tree which sheds over onto our yard. We have purchased several rakes but none seem to work - to pick up all of the cedar leaves...
0
answersupdated about 1 year ago by BV015002
replacement screws
I need replacement screws for my shed and can't find them anywhere! Suggestions? danipete1@gmail.com
0
answersupdated about 1 year ago by BV014964
Selling 2 Green Machines
both used; one working and one with a broken plastic gear. Also one has newly crafted custom tines much thicker and stronger than stock tines. Contact me with of...
0
answersupdated about 1 year ago by BV014956
Thinking Outside Shed parts
I have hinges # 44024 that are missing screws. Anyone have 6 of them?
0
answersupdated about 1 year ago by BV014930
winterizing
I have a 45ft by 25 ft area to cover but greenhouses of this size will be too expensive. What can I use? I live in North GA and I have banana trees, lemon trees a...
0
answersupdated about 1 year ago by BV014908
Concrete Steps
How can I tell if our concrete steps (one piece) was made from a form or built with blocks underneath? Our house was built in 1986. Who would we call to have on...
1
answersupdated about 1 year ago by BV014907
Mold on canvas swing
How do I remove mold/mildew from my canvas swing?
1
answersupdated about 1 year ago by tigert987
