water coming from base of toilet
I hope someone can give me some direction. Background: I have a typical 2 story New England colonial with a septic system. I have 2 baths upstairs and 1...
I hope someone can give me some direction. Background: I have a typical 2 story New England colonial with a septic system. I have 2 baths upstairs and 1...
1
answersMy husband and I are building a 3500 home, all electric. The builder is suggesting two tanks. We think it may not be necessary, since there are only two of us. ...
0
answersOur 2015 Whirlpool Gold Series dishwasher is covered in a dark residue on the inside unit walls and door. The dishes come out "clean", but the rust colored film ...
6
answersit is a rust pimple the size of the tip of my little on the joint close to the concrete floor. just a slight evidence that waste water leaked out. tiny dried rust...
0
answersI live in an old house with a 30x30 inch shower pan and tile walls. I need to replace the shower pan but can't seem to fine anything smaller than a 32x32. I've ...
8
answersHi - I live in a city condo building. Am redoing the bathroom and the new vanity needs a 5/8' filler against wall, thus moving my sink 5/8" from its current locat...
0
answersCould anyone tell me where I can buy a replacement, or information on, a Homart wall bathtub faucet. I believe it was sold by ***** between the 1960s and 1970s. ...
14
answersI have a Frigidaire dishwasher that's about 7 or 8 years old I think. (It was here when we moved into the house 2 years ago) A few months ago it started to seem...
0
answersCan anyone identify the faucet brand from the logo shown on the attached photo?
0
answersCan anyone identify the faucet brand from the attached logo?
0
answersWhy is my toilet gurgling, occasionally drains slow and it’s vent pipe is filled with water up to the roof level? Thank you, Dave
0
answersI WORK FOR A HVAC CONTRACTOR, AND WE INSTALLED A 90% (CONDENSING) GAS FURNACE IN AN UNCONDITIONED ATTIC. THE EXISTING 80% (NON-CONDENSING) FURNACE DRAINED OUT THE...
2
answersHello. We plan to update our 2 bathrooms this year. We won't be taking down walls, etc. We will replace the vanity, sink and toilet. That we know how to do (i...
5
answersHi all, I have a lever/plunger type assembly in my tub. The tub will not hold water. I pulled the assembly out of the overflow. It has a brass plunger. ...
0
answersI recently saw an Amish home for sale and the house was built on a concrete slab. There is no plumbing installed in the house whatsoever. How hard would it be t...
3
answersShould I be worried if the hi-limit reset button on my upper thermostat "tripped"? I noticed that I didn't have hot water, so I opened the access panel and notic...
3
answersSo we just bought a house and int he basement I found what i thought was a Homart brand well pump (we're on city water now)... there are two wells, 2" in diameter...
6
answersOkay so I have two things working against me here... I'm working with a 1 1/2" sink tailpiece, trying to get it into a 1 1/4" trap adapter. The trap adapter ...
0
answersHello, I just replaced the shower diverter valve on my bathtub. It came with a seat. I removed the old seat, but I can't install the new seat. I tried to reinsta...
1
answersHi all, I'm new here. Do you think that this company is any good when it comes to plumbing products: https://ipscorp.com/plumbing/ ? If you have other suggestions...
0
answers