I recently purchased an old farm house with a well. The current pump is a jet pump residing in our basement. It is a 20/40 pump that puts out abo...
0
answers1942
Views
We have started to return our "modernized" 1920's Colonial to its original splendour - we now have beautiful dark oak stairs - but the entrance hal...
0
answers1161
Views
Anyplace to check out price range for installation and pads? I have a good idea on the carpet price, but live in a small town and just want to make...
1
answers1495
Views
The hardwood floor in our kitchen bay area is very cold. I just finished the basement and insulated between the floor joist and drywalled basement ...
0
answers1950
Views
I just had a Humidifier installed on our furnace and now we have condensation(ice) on windows. There are 2 windows on the back of the house in our ...
0
answers1945
Views
I've replaced several bulbs in my basement landing light, which is recessed in the ceiling. I've even replaced the socket and checked the rest of ...
2
answers2059
Views
I have been prepping my dining room walls for painting, stripping old wallpaper. One of my walls, unlike the others, has primer on it, painted ont...
0
answers1558
Views
Can you tell me roughly how long it would take 2x16 floor joists to begin to rot in an unvented crawl space, 2" over a dirt pad. The joists are hol...
0
answers1961
Views
we have recently discovered a tin ceiling in our dining room that had been covered over with a drop ceiling. two small sections have water damage ...
3
answers1746
Views
HEY, MY WIFE AND I JUST BOUGHT A HOUSE BUILTIN 1938, IT HAS ONE BATH DOWNSTAIRS,WE'RE THINKING OF MAKING A CLOSET UPSTAIRS INTO A HALF BATH, I TALK...
1
answers1228
Views
I just saw the computer controlled shower head on the show today. I would like to know the cost and availability of the system. The show also inclu...
1
answers1621
Views
I am convinced my water bill has gone up with the installation of the new low flow toilets. Multiple flushes and frequent clogs are the reason. I...
1
answers2809
Views
I flick the switch on my garbage disposal and NOTHING happens -- not even an enigine hum. What are the steps I take to check this out?
2
answers2021
Views
looking for information on national home prefab houses built in the 50's. Looking to find out if a interior wall is weight bearing or not.
0
answers1255
Views
We are planning to finish our basement and the work has begun. The walls were already up when we moved in. While removing drywall in one spot for t...
0
answers1783
Views
I am looking an attic ladder that has a rough opening at least 30" wide. I would prefer Al instaed of wood. We have 8' ceilings. I have only fou...
0
answers1935
Views
I need to clean some tarnished brass switch plates and then to protect them so that don't oxidize. I recall seeing Bob having refered to a method o...
1
answers1683
Views
I am looking for a manufacturer of custom False doors. I have a room, that I want to install a false door into a stand 32" frame.Any suggestions?
0
answers1769
Views
remove old caulking from sink area,around tub and bathroom sink.application tips for new caulk?
0
answers1784
Views
I need to be able to easily move my Craftsman workbench due to limited storage/work area. I don't want to increase the height of the work surface ...
0
answers2113
Views
by Freshome
by Inthralld
