I am interested in an inexpensive(under $ 500) software program to do remodeling design work. What can be recommended?
I have a York LP Gas furnace with 3 burner tubes. The tubes are burning back into the venturi, near the orifice. The system has been cleaned and ...
I just bought a nice little old house (build in the '20-'30s)with dark stained hardwood thru 4 rooms. This next summer I will be having them refin...
we want to build a new balcony on a second story. 10ft/8ft over existing garage, remove existing wall/closets, add sliding glass doors and 8ft balc...
Do you lay laminate flooring under the stove and refrigerator.Or do you stop just under the front?
I need new spring clips that hold the glass/screen in a stormdoor. Can someone provide a source for these?
My wife and I planning to add on to our 900 sqft ranch style home in the near future. After speaking to the building inspector, it seems our altern...
does anyone know who may reprint old appliancemanuals? the ones supplied with the appliance originally? right now i need one for a 70's whirlpool d...
My new home is almost entirely built using 3x10 joists for the floor. At least the first floor is. The actual thickness is a tad over 2 1/2".A re...
My new 44-year-old house has an oil-fired hot air heating system, and the ducting is non-insulated. I would like to wrap insulation on the outside ...
I am looking for information / advise on installing a knotty pine ceiling over an existing drywall ceiling. Can it be done? Is it difficult? Can...
My new 44-year-old house has an oil-fired hot air heating system, and the ducting is non-insulated. I would like to wrap insulation on the outside...
I just saw the end of a show where an instant whole-house hot water heater was being installed. I will be needing a new water heater shortly and w...
I just saw the end of todays show here in Montreal and it was showing the installation of a very small hot water heater. This appears it would be ...
Bob, on a recent show we watched as exterior brick was painted. We have the same problem, the brick was very porous when installed and as a result...
On one of bob's shows he had some cabinents made by a company named Heritiage in Pennsylvania. Does anyone know how I can get in touch with them.C...