Garbage Disposal
I flick the switch on my garbage disposal and NOTHING happens -- not even an enigine hum. What are the steps I take to check this out?
I flick the switch on my garbage disposal and NOTHING happens -- not even an enigine hum. What are the steps I take to check this out?
2
answerslooking for information on national home prefab houses built in the 50's. Looking to find out if a interior wall is weight bearing or not.
0
answersWe are planning to finish our basement and the work has begun. The walls were already up when we moved in. While removing drywall in one spot for the fireplace I ...
0
answersI am looking an attic ladder that has a rough opening at least 30" wide. I would prefer Al instaed of wood. We have 8' ceilings. I have only found one manufact...
0
answersI need to clean some tarnished brass switch plates and then to protect them so that don't oxidize. I recall seeing Bob having refered to a method of getting the o...
1
answersI am looking for a manufacturer of custom False doors. I have a room, that I want to install a false door into a stand 32" frame.Any suggestions?
0
answersremove old caulking from sink area,around tub and bathroom sink.application tips for new caulk?
0
answersI need to be able to easily move my Craftsman workbench due to limited storage/work area. I don't want to increase the height of the work surface any more than n...
0
answersI am building a sunroom addition, which willhave a poured concrete foundation, which will be attached to an old house with a fieldstone foundation and would like ...
0
answersWe have a yellow/brown brick fireplace that is hiddeous. The walls have been painted white and blue carpet installed. Now we need ideas on what to do with this ...
0
answersThe dishwasher in our house just went out, and in buying a new one we learned that we don't have an airgap, and that code requires us to have one. Can anyone tel...
0
answersI love the look and security of some of the new steel doors which also use stained glass inserts. My contractor though says that steel warps as much as wood and i...
1
answersOur house is approx. a 1200 sq ' bungalow. There are four support beamsapprox 10 feet apart. The two that I wish to remove are next to each otheron one side of t...
1
answersis there a handoperated shear for metal studs? I picture a tool similar to a rebar cutter
1
answersI am looking for plans or patterns for making shutters for exterior windows. I used every search engine available but could not come up with any hits. Any help wo...
0
answersWe just purchased a new home in the early fall. Over the last couple of months since the weather has gotten cold the upstairs ceiling is seperating from the wall...
1
answersWhat is the best way to go about this? The tile was laid over drywall. Thanks!
1
answersDue to limited space, I built a computer monitor desk that is attached to the walls on 2 sides. On these sides it rests on a 2x2 that is bolted into the studs.Th...
1
answersWhat is the best way to go about this? The tile was laid over drywall. Thanks!
1
answerswant to fix a hole in plastered wall about the size of a basketball. What materials do i need? Any help would be appreciated. Thank You
2
answers