Blue PVC???
I was wondering what the purpoe of blue PVC is. My cousin said it is called orion and is chemical resistant. Is that right?
I was wondering what the purpoe of blue PVC is. My cousin said it is called orion and is chemical resistant. Is that right?
0
answersI'm going to construct a small workbench area and want to run two new circuits to the area. I've thinking about using 14/2 with ground for a 20 amp system. Is ...
4
answersWhat could be causing many of our light bulbs to burn out frequently? This is primarily affecting our outside lights, but some of our inside lights are affected ...
4
answersI just tiled my basement floor and now after I grouted it I seem to have that stubborn grout and a hazy mist on the tiles is there anything special to use to take...
1
answersHello all. The FAQ did not precisely answer my question so I'm hoping to get some help here. I am building a dek but my house has no rim joist. The joists are ...
0
answersAny effective techniques for sanding and repainting kitchen cabinets would be much appreciated.
0
answersHi there. I am living in a 50 year old, war time house that I'd like to renovate. I would like to create an open concept kitchen/ living room, and need to know ...
2
answersI have an unheated garage with an old concrete floor that has seen better days. I'd like to re-surface the floor so I can easily move use my mechanics creeper an...
0
answersI have weatherking rurnace and the blower continually runs I am forcedto manuaully switch on and off. Can any one tell me what the probelm is the fuernace is 13 y...
1
answersHi All,I am having troubles getting my flourescents in the garage to correctly light...or in some cases to light at all. Have even replaced all bulbs to no avail...
1
answershave never used them.. how do you use andwhat is the difference is sizes is it similarto the use of wood studs... how do you connect them to joists and each other...
2
answersI need to drill one (4") hole through my poured concrete foundation wall (8"), and two holes through my (4") slab. I plan to use an electric hammer drill w/ 1/2 ...
3
answersI'm planning on removing some concrete in my back yard, and I'll need to get a dumpster or haul it away. However, I have no idea how much weight and volume this ...
0
answersHi - a couple of questions - 1. Is an automatic setback "switch" hard to install? I have a hot water boiler heating system with two zones - it's a pretty old syst...
1
answersI would like to use parquet flooring, I remember seeing different ways to lay it, thus giving a different effect to the otherwise over used pattern, anyone have a...
0
answersI have a home with plaster and lathe walls and I want to replace the electric (knob and tube) and have new, smooth, crack-free walls. Do I go through the mess of...
1
answers1
answersI have a 18 year old 2 story frame home with vinyl siding. It has 3 bedrooms, 1.5 baths, LR, DR, and deck. The home dimensions are 24x28 giving me 1344 sq feet. ...
0
answersIn a house that was just aquired there is a fireplace that is Italian Marble, at sometime, in its life someone decided to put several coats of paint on it, I am n...
0
answersArchitectural Salvage Business - Does anyone know the name and location of the business from which Bob purchased the outdoor iron fence in the Greystone Project (...
0
answers