Latest Discussions : Electrical & Lighting

zooba72

08:16PM | 12/19/11
Member Since: 12/18/11
11 lifetime posts
Hi - I recently purchased a home that is primarily low voltage wiring and push button Remcon switches and relays. The relays are distributed around the house at each fixture. Since all of the lighting receptacles, switches, and relays are very old, I'm trying to figure out what my options are for updating this system? The house is quite large, and replacing all of the electric with standard wiring would be a massive effort that I would prefer to avoid. Any information, suggestions, etc... would be appreciated. Thank you in advance.
Img 5760

K9

07:43PM | 07/10/12
Member Since: 07/10/12
1 lifetime posts
Try kyledesigns.com they carry the REMCON System brand

(now AMPROBE). The system is still in use today. This sit can offer you suggestions that might help your decision

REgards.

jim l

08:41PM | 02/17/13
Member Since: 02/17/13
1 lifetime posts
Hi, I'm replacing a remcom lighting system in a house in CT. The relays are available on line at many places. The main problem is finding replacement switches and plates. I found some switches on line that will work, but they will not work with the existing plates. I found a person that will cut out the metal plates in a machine shop at a reasonable cost. I hope this helps.

Thank you,
Jim


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register