03:23PM | 04/14/12
Member Since: 04/14/12
3 lifetime posts
Youngstown by Mullins 1950's
Here is the craigslist ad for photos and dimensions.

We are in Philadelphia.


03:28PM | 04/14/12
Member Since: 04/14/12
3 lifetime posts
We are asking $200 Cash

The buyer is responsible for shipping if needed. If local to Philadelphia we might deliver for a delivery charge.


02:31AM | 04/16/12
Member Since: 01/31/12
2 lifetime posts
ERW pipe is divided into many different kinds. Following is their difference and various usage.
Welded steel pipe: also known as pipe, it is made by bending steel sheet or strip, and then welded. According to the weld form it is divided into Longitudinal and spiral pipe.
By end-use it is divided into general pipe, galvanized pipe, oxygen lance pipe, wire casing, metric pipe, roller pipe, deep well pump tubes, automobile tubes, transformers pipes, welding thin-walled tube, welding shape tube and spiral welded pipe.
1> General pipe: General pipe are used to transport low pressure fluid, we also call it black pipe. Material is almost of Q195A, Q215A, Q235A. Or some other easily welded mild steel. Pipes must be conducted the experiment of the pressure, bending, flattening and surface quality. Generally the delivery length is 4-10m, and often be required to deliver special length (or double length). Specifications of welded pipe with nominal diameter (millimeters or inches) are different with the actual. As to the wall thickness of pipe, there are ordinary steel pipe and thicker steel pipe. By the form of pipe end, there are sub-threaded and threaded. With the technology of welded steel pipe to improve and processing be more simply, some welded pipe can replace part of the seamless pipe. And we can produce pipes of outer diameter up to 219mm (8 inch) right now.
2> Galvanized steel pipe: in order to improve the corrosion resistance of steel pipes, we always coat some zinc on the surface of general steel pipe, that is galvanized pipe. There are two division of galvanized pipes: hot-dipped and electro-galvanized. The zinc coating of hot-dipped galvanized is thicker than electrical. But the latter is less cost.
3> Blowing Oxygen: The pipe is used for blowing Oxygen in steelmaking. generally are small diameter pipes. And sizes are almost eight kinds from 3/8 inch to 2 inch. Material are almost 08,10,15,20 or Q195 AT-of Q235. For corrosion resistance, some pipes are aluminized.
4> Electric wire conduit: Generally it is common welded carbon steel pipe and used in concrete and a variety of structure and distribution projects. The nominal diameter are from 13mm to 76mm. The wall thickness is thin and mostly coated or galvanized. And cold bending test has been requested.
5> Metric pipe: The specifications are always the same with seamless pipe, that is OD*wall thickness(mm), Material are almost of ordinary carbon steel, quality carbon steel or general tropical low-alloy steel. Welding or cold-drawing after welding. Metric pipe are divided into ordinary used and thin-wall. Ordinary used pipes are used as structural components, such as drive shafts and transmission fluid. Thin-wall pipes are used in the production of furniture and lamps, etc., But it has to ensure the strength and bending tests of the steel pipe.
6> Roller tube: The roller tube is used for belt conveyor, usually the material are Q215, Q235A, B-grade steel and 20# steel. Diameter are from 63.5mm to 219.0mm. It has certain requirements curvature, end perpendicular to the centerline and ellipticity. Always it should be conducted the general pressure and flattening test.
7> Transformer tube: The transformer tube is used for transformer cooling pipes and other heat exchangers, material is almost ordinary carbon steel. The tubes should be conducted the flattening, flaring, bending, and hydraulic test. Transformer tubes are required to cut to length or double length delivery, there are certain requirements for curvature of tubes.
8> Shaped tubes: The material are almost ordinary carbon structural steel or 16Mn. Shapes are always square, rectangular, cap and tubes for doors and windows. The shaped tubes are mainly used for agricultural components and steel window and door.
9> Welding thin-walled tube: Welding thin-walled tube is mainly used to make furniture, toys, lamps, etc.. In recent years, the applications of stainless thin-walled tubes is very wide range, like fine furniture, decorative material and fence.
10> Spiral welded steel pipe: Spiral welded pipe is produced to roll the low-carbon structural steel or low alloy steel strip according to the angle of the spiral line (called the forming angle) rolled into the tube and then welded together, It can produce large diameter steel pipe by narrow strip. Spiral welded pipe is mostly used for oil and gas pipelines, Its specification is always of OD * wall thickness. There are two welding forms of spiral welded pipes, that is one-sided and double-sided welding. the pipe should be conducted test of hydrostatic, the weld tensile strength and cold bending performance.


09:19AM | 04/17/12
Member Since: 04/14/12
3 lifetime posts
This item has been sold. I can't figure out how to remove the post though.
Click to reply button Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

To test the boundaries of small-footprint living, interior designer Jessica Helgerson moved her family to a 540-square-foo... Filling an underutilized area beneath the stairs is a smart way to save space. Doing so with a stash of wood, however, is ... The Audubon Society inspired wallpaper in this Adirondack-styled mudroom will get you in the outdoor mood. Grab your coat ... Chalkboard paint opens up endless possibilities for customizing your dresser time and time again. Use chalk to label the c... A fireplace in the bathroom creates the ultimate setting for relaxation. Homeowners often choose electric or gas over wood... This roomy boot tray made from punched metal stands up to all the elements. Station it in your mudroom or at your back doo... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... FLOR tiles are an affordable way to customize a carpeted floor covering for any space. Make anything from runners to wall-... Chalkboard paint features prominently in this elegant yet unpretentious headboard design. Add a new message daily to reflec... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... The indecisive homeowner need not fret over choosing one (or even two) cabinet colors. The kitchen cabinets in this artist... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... First dress up your metal shelves with a coat of paint in an accent color that complements your kitchen decor. Then arrang... Dark wood shelving and a matching upholstered bench keep this closet sleek and refined. The large window brightens the sub...
Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon