It's a model: JGSP31GEP4WG
I posted a while ago about this problem. I only recently had time to follow some of the suggestions. I took out one of the ignitors and tested its continuity. It's giving me 314 Ohms on the meter. The PDF you pointed me to said that it should be 50-150 but that the value didn't matter as long as it wasn't open or shorted. I don't know if 314 constitutes "open" or not.
The other thing I checked was that the wires that go to the ignitor get power. I hooked up the meter to the wires, closed the oven door switch and turned it to bake 350. The meter reads a tiny voltage for a second and then there's a click and it goes back to zero.
Any help appreciated. My original post is here:
Get Help from Bob Vila
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries