Latest Discussions : Tools & Workshop

SayeJenn

09:24AM | 05/05/03
Member Since: 11/05/02
18 lifetime posts
My husband and I recently put in new oak cabinets in our kitchen. When we hung the cabinets we placed shims in to make them level. Now we have an ugly gap between the ceiling and the cabinets. We planned on putting some oak trim up to cover the gap, but we have two rounded corners which is impossible to flex to trim around. Any ideas?

Altereagle

03:45PM | 05/06/03
Member Since: 12/27/02
543 lifetime posts
Get some stock to match the trim and radius the corner. Use that as a filler and glue it in place.

SayeJenn

05:16AM | 05/07/03
Member Since: 11/05/02
18 lifetime posts
I'm not sure what you mean by stock. Thanks for your help.

Altereagle

07:00AM | 05/07/03
Member Since: 12/27/02
543 lifetime posts
If the trim (crown) is oak, pick up a piece of 1/4 oak at the depot or somewhere handy then cut out the radius & the corner, then glue that in.

"Stock" is a generic name for a piece of wood.

SayeJenn

10:01AM | 05/07/03
Member Since: 11/05/02
18 lifetime posts
Thank you!



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register