Latest Discussions : HVAC

gahan1

10:02AM | 02/21/04
Member Since: 02/20/04
2 lifetime posts
Have an American Standard Heat Pump and wanted to replace the stock thermostat with a Honeywell CT3611 to save some energy.

Can read a diagram, but the CT3611 calls for a connection on the L connector from either the L or F on the old thermostat. Problem is I don't have one. It states that it is a system monitor. I have a T-tan wire from the old thermostat that I need to tape up. Do I need the L connection?

Of course the Honeywell help desk is closed on the weekend when I try to do the job.

Thanks in advance.

gahan1

11:42AM | 02/21/04
Member Since: 02/20/04
2 lifetime posts
Connection for L or F not needed.

Found the answer at

www.hvacmechanic.com in the forums.




Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register