11 Things to Know Before Visiting the Lumber Yard

Choosing the right wood for a home improvement project can be tricky for experienced woodworkers and novice DIYers alike. Luckily, knowing a few key lumber facts can make it easier to select the right woods for a whole range of projects—from framing to decking to furniture making. What is the real difference between hardwood and softwood? What does a wood's grade say about it? Which is more durable, pressure-treated lumber or composite decking? Should you opt for plywood or oriented strand board? Before you choose a wood for your next home project, understand the wood's benefits and drawbacks. Here are 11 facts you should know before you buy lumber for your next DIY.

  1. Hardwoods vs. Softwoods

    Hardwood Lumber, Softwood Lumber

    The terms "hardwood" and "softwood" can be deceiving, as there are types of each which defy their names' implications. Hardwoods are derived from deciduous trees and include mahogany, oak, birch, and walnut. Softwoods come from evergreen conifer trees and include pine, cedar, fir, and spruce.


  2. Hardwood Grades

    Hardwood Grades

    The National Hardwood Lumber Association established standards for grading lumber that are based on the number of defects in a board. The highest grade is FAS (or Firsts and Seconds), followed by lower designations that include, in order, Select, No. 1 Common, and No. 2 Common.


  3. Softwood Grades

    Softwood Grades

    Softwoods are split into two categories and graded according to the American Softwood Lumber Standard. Dimensional, or "construction," lumber is graded on strength, while "appearance" and remanufacture lumber—boards that provide the raw material for other products—are graded on looks. The two primary grades are Finish followed by Select, each with letters A, B, C, and D as subgrades. The further down the alphabet, the more defects.


  4. Plain-Sawn


    Boards differ in appearance and behavior depending on how they've been cut from a log. Plain-sawn cuts, illustrated here, leave the least amount of waste but are more prone to cupping and twisting.


  5. Quarter-Sawn


    In quarter sawing, the log is first quartered, and then each board is cut successively along the axis of the wedge, which yields fewer, but sturdier, boards.


  6. Rift-Sawn

    Quarter Sawing

    Rift sawing cuts along the radius of the log so the grain pattern is the same in each cut. This technique results in the strongest boards, but they cost more.


  7. Pressure-Treated Lumber

    Pressure Treated Lumber

    Pressure-treated lumber contains chemicals that seal the wood to protect it from fungi, insects, and decay, so it's the best choice for outdoor projects. Because it is typically manufactured from pine, however, treated lumber can be susceptible to warping, swelling, and even water retention, so some routine maintenance is required.


  8. Dimensional Lumber and Studs

    Dimensional Lumber

    Dimensional lumber is a term used for wood cut to standardized widths and depths, specified in inches, such as 2 x 4 or 4 x 4. For wall framing, stud or precut sizes are also widely available.


  9. Decking


    Decking encompasses real wood, treated lumber, and composites that are suitable for floor boards and railings. Composite lumber is a mixture of wood fiber and plastic that forms a material denser and stronger than wood. Though it costs a little more and is available in fewer colors than real wood, it's the lowest maintenance option for those not interested in sanding, staining, or splinters.


  10. Plywood and Oriented Strand Board

    Plywood and Oriented Strand Board

    Plywood and oriented strand board (OSB) are both structural panels that are used widely in framing and subfloors, but each has its own strengths and weaknesses. Plywood is lighter, off-gasses less, swells less, and retains less water than OSB. OSB, however, is generally more uniform and more affordable, and it's considered the "greener" of the two options. Do your research before choosing the right one for your home project.


  11. Lumber Defects

    Lumber Defects

    Defects are most easily divided into five groups that encompass both manmade and naturally occurring imperfections: conversion, which refers to defects that are created during processing of the lumber, such as improper sawing or chips caused by a falling tool; fungus resulting from high humidity and warm air; insects such as carpenter ants or termites; natural forces like abnormal tree growth; and improper seasoning from the uneven drying of lumber.


  12. For More...

  13. See the House of the Week


    Discover and admire beautiful and innovative home architecture, from grand Victorians to quaint cabins and all the styles in between. Take a look at the latest images and inspiration!