Good luck with that!
When I was researching the hinges I came across a few complaint sites and whoa were there a bunch of door issues where the entire door just fell ri...
COMMUNITY FORUM
Recent Posts
almost 11 years by ACD
49
answers295
Views
Did a temp fix.
I found what the main issue is with these hinges. the pocket is bend steel with rivets used for the hinge pins. they loosen up and cause the door t...
almost 11 years by ACD
49
answers734
Views
Installing laminate in door opening?
I have two rooms I am installing click together laminate. My only question is where the flooring enters the room. Do I cut it even with the jambs w...
almost 11 years by scuttlebuttrp
1
answers2661
Views
Solutions
I am in the middle of building my basement out, just about finished with two of the bedrooms. I already have a bath and bedroom complete. What I di...
almost 11 years by ACD
3
answers911
Views
Nasty
I had a similar situation with my house, the previous owners were dog lovers and took in strays. The carpets were ruined and soaked into the subflo...
almost 11 years by ACD
3
answers1001
Views
Time to see if Johnny boy can help!
I have a friend who does HVAC, he actually moved the A coil for me to the new furnace off my old one when I installed this one and checked my other...
almost 11 years by ACD
2
answers786
Views
Holy heat exchangers batman
It is a GMNT 120-5. I tore down the burner assembly this morning and cleaned them all up, then found the flue collector has a crack in it right dow...
almost 11 years by ACD
2
answers278
Views
Janitrol GMNT with noisy burner
I have a few year old GMNT I installed myself and had checked out by a pro installer so I know it was installed properly. The burners recently star...
2
answers3462
Views
Been a while but.....
I finally got around to pulling the unit out to look at. I found out what the problem is, but not sure if getting replacement receivers will correc...
almost 11 years by ACD
49
answers413
Views
Gutter pitch
I am going to need to pull off the gutters when I redo my roof as it needs new drip edge all around. In addition, the fools who installed the gutte...
about 11 years by ACD
0
answers3424
Views
Burying corrugated drain pipe
I have about a 70' run of pipe I need to bury that runs from the house to a pit I dug to carry sump water away from the house. Is there anything sp...
0
answers5154
Views
thats for sure
what about the felt paper though, should I or does it really matter?
over 12 years by ACD
5
answers346
Views
Re-roof
I am doing mine over, its 6000 SQFT of shingles. I contemplated a tear off and redo, but the cost at this time is prohibitive, plus I have to do it...
over 12 years by ACD
5
answers229
Views
Strange toilet problem
Occasionally my toilet will burp, actually all three toilets burp. Air bubble come up into the bowl, and if I flush the toilet it will not drain. N...
0
answers2182
Views49
answers332
Views
OK
I am going to take it apart this weekend and see just what is up with it now that I have the parts breakout. I need to get the inside glass cleaned...
almost 13 years by ACD
49
answers561
Views
Thanks
I submitted a question as to the hinge adjustments to see if it is something I can do myself instead of having to take time off to have someone com...
almost 13 years by ACD
49
answers1089
Views
Warranty
It is still under warranty, and I submitted a question into Maytag on this, and waiting on a response. I posted this at the same time I submitted t...
almost 13 years by ACD
49
answers804
Views
It is fairly new
Has done it from day one. The only time it will close fully is when doing the self cleaning and the automatic door lock closes the door. It is like...
almost 13 years by ACD
49
answers248
Views
Jenn Air Oven door
Doesn't close properly, sometimes the light will stay on unless you push the door in and hold it a few seconds, but if you close a cabinet door nea...
almost 5 years by BV002506
49
answers56344
Views
