Re: kenmore side by side refrigerator side not cooling but freezer fine
Hi, Might help... http://www.applianceaid.com/refrigerator-not-cold-enough.php Some simple things ot check. jeff.
COMMUNITY FORUM
Recent Posts
about 6 years by appliguy
1
answers1216
Views
Re: Kenmore 70 Series washer -- timer not advancing
Hi, **it went through the wash cycle and then the timer just stopped and it didn't drain, rinse, or spin. I heard the issue might be the lid swi...
about 7 years by appliguy
11
answers774
Views
Washer
Hi, 110. is the beginning of a model#. **It will spin off some water but leaves most in the basket** The motor runs through the whole drai...
over 10 years by appliguy
1
answers699
Views
Microwave
Hi, **it doesn't heat anymore.** What happens instead? Just the diaplay counts down with no sounds? Makes a growling noise? Sounds like ever...
over 10 years by appliguy
1
answers337
Views
Dryer
**The lid worked out fine** Good :) **The dryer doesn't get as hot with the new heat element as it used to get. Even running it on cotton set...
over 10 years by appliguy
9
answers1021
Views
Range
**An F3 is normally an fault code for a bad oven temp sensor...wiring to and from the oven temp sensor...bad connection in the clock for the oven t...
over 10 years by appliguy
6
answers383
Views
Range
Your welcome! :) jeff. Appliance Repair Aid http://www.applianceaid.com/ JRAppliance http://www.jrappliance.ca
over 10 years by appliguy
6
answers714
Views
Range
Hi, An F3 is normally an fault code for a bad oven temp sensor...wiring to and from the oven temp sensor...bad connection in the clock for the o...
over 10 years by appliguy
6
answers889
Views
Dryer
Your welcome! If you get a chance, let us know how you make out with the dryer. jeff. Appliance Repair Aid http://www.applianceaid.com/ JRAp...
over 10 years by appliguy
9
answers286
Views
Dryer
Hi, **110.60922990** **The front doesn't want to reattach. It looks like there are two clips that have become pushed closed.** I -thought-...
over 10 years by appliguy
9
answers316
Views
Washer
**Turns out that there's only 28" vertical from the washer outlet to the drain pipe inlet.** A tad too low. **Ironically, the washer worked f...
over 10 years by appliguy
5
answers748
Views
Washer
Hi, **Model Nr. SAV515DEWW** An Amana built washer with a Maytag name on it. **Water flows in OK but the tub can't hold water. The drain i...
over 10 years by appliguy
5
answers477
Views
Dryer
Hi, **66822694** I got 110.66822694 to work for me. **It is running fine except it will not heat during drying cycle** A copy: Q - My ...
over 10 years by appliguy
3
answers747
Views
Gas range
**What is the best way to check (test) whether there is a problem or not with the bake ignitor?** Ignitor can be checked for continuity...the be...
over 11 years by appliguy
3
answers911
Views
Washer
Hi, **the hose is stuck to the faucet in the wall.** ?In? the wall? One of the fill hoses...right? Tried a rust buster or penetrating oil? ...
over 11 years by appliguy
1
answers684
Views
Gas range
Hi, **When you turn the oven on, there is a click but I do not smell gas or see anything light up. What could be the problem??** Is the bake ...
over 11 years by appliguy
3
answers1186
Views
Kenmore model#?
Hi, Kenmore is made by severla different companies...model#? http://www.applianceaid.com/model.html Some model# helps. **it will not stop fi...
over 11 years by appliguy
1
answers251
Views
Great
Happy we could help :) jeff. Appliance Repair Aid http://www.applianceaid.com/ JRAppliance http://www.jrappliance.ca
over 11 years by appliguy
3
answers590
Views
Dryer
Hi, **Fix or replace-need age of Kenmore dryer** Age shouldn't have much to with a repair until the problem is found and what is needed to co...
over 11 years by appliguy
1
answers1201
Views
