Measuring & cutting molding
Can anyone offer some pointers about how to best measure & cut door and base moldings? I always seen to get my measurements wrong, so I wind up wasting a lot...
Discussion History
Hot/where to install damper
I am running new duct work into a room and since its temperature does not change all that much from season-to-season, I was told I should install dampers. My p...
0
answersupdated over 15 years ago by biggcb2004
Placement of new vents
I am remodeling the family room of split level house. It iwll be approximately 500 or so sq feet when completed. The original room was about half this size and ...
0
answersupdated almost 16 years ago by biggcb2004
Adding 2 new ducts - f/up
Thanks for the input. I will definitely look into the blower capacity. I live in the suburbs of Philly - we get snow, but certainly is not snow country. There ...
3
answersupdated about 16 years ago by biggcb2004
Adding - f/up
Thanks for the info. The upstairs master bedroom never seems to get as warm as the main part of the house (it is the last duct on the end of the main run) - do...
3
answersupdated about 16 years ago by biggcb2004
Adding two new ducts/vents
I am in the process of renovating the family room of my split level house. The room is on a concrete slab and the back wall is level with the ground. The space ...
3
answersupdated about 16 years ago by biggcb2004
Need advice on brand of table saw to purchase
I am in the market for a table saw and was looking for some advice/opinions as to what brand/model to purchase. I have looked at Rigid and Craftsmen, but also he...
3
answersupdated about 16 years ago by hcbph
Painting vinyl siding
We are interested in painting our vinyl siding and wanted to know how successful this is? And how long we can expect it to last. The siding is in good shape, it i...
1
answers
