PSThe door/doorway is an INTERIOR application.bb
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
We have framed a rough opening for the doorway in which we plan a threshold.Here are not quite twenty questions:Do we attach the threshold to the f...
First, a BIG thanx to JJ and Carpetman. And I HEAR you, I HEAR you, and I'm thinking, I'm thinking! BUT, I'm in no hurry, and want to use the next...
I should have repeated the fact that the underlayment and the finsihed flooring both run in the SAME direction ;-(((. There are earlier mesagges wi...
We KNOW lack of humidity led to the appearance of gaps in the finished flooring and that HOPEFULLY a return to normal humidity will result in a ret...
Posted yesterday on same subject, but without the icon. ANY suggestions or ideas most gratefully accepted.
Dear Woman-hours. I wish you luck; I've had the same kind of experience, trying to keep my grout clean and white, having explicitly explained this...
After 32 years living in a 'company' house built in 1927, we have discovered all the first floor hardwood flooring has been laid in the SAME direct...
Am a newbie to this world; why is it better to toe nail thru the joist, instead of straight into it, which is what the illustration on the box of j...
Would an epoxy or epoxy based product create a water/dirt/food impermeable barrier if used as a 'sealer' on grout?
My vanity may be overpowering common sense.I'm tempted to use decking clips, but all the pro's around here look at me cross-eyed.So if I did use cl...
So far, I've been unable to find a product that will completely, permanently seal grout. I thought I'd found something, applied three coats, follow...
I just bot some joisthangers. Instead of the usual punch holes, these have flared material that pretty much dictates that any nailing will be toen...
Tp Matches: You've sure helped; I think I'll try using some C-clamps and heavy duty angle iron, that is, after I've stripped as much paint as poss...
To Member: Re "Old Method" of dealing with warped louvered panels. Thanx for the response. The "old method" is new to me. Does it work, eventua...
One of a set of four louvered and painted wood panels used in a double wide doorway has become warped. Does anyone have any suggestions at all as t...