you might try this link http://www.craftsmancollection.com/
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
go to http://www3.sears.com/ enter in model number select model go next page scroll down to wiring and it will show you the diagram
The plumber should of ran the snake (was it the electric kind that has like a claw at the end or just the round skinny kind which will not do noth...
We found mold (green kind) on the cement peer of our house. We got into the crawspace and with big sheets of plastic that the painters used and jus...
here is some informatin regarding installation in bathroom. So the final decision would be yours. http://www.warnercorp.com/installation.html
Seems like your limited on what you can do my concern is with the drywall which is heavy there would be no support to hold the weight since you are...
the edge moulding is the finishing touch which should be the responsiblity of the person installing your countertops. It is like hanging a pictur...
Not to be a smart alec but I would think a floor covering store in your area would have the pattern, or is it that he wants you to create the patt...
Okay I am thinking that you have the chute installed and you want to cover up where the chute comes through the ceiling. If so why not put some of ...
Carpet cleaner companies will offer you a scotch guard when they clean this will help also what ever you dont use runners that have rubber backing...
you did not indicate which kilz primer you used there have it for for indoor and outdoor oil based and latex, just wondering also how long did you...
Look towards the bottom of this link gives a solution http://www.srfabrics.com/care/stain.htm
this might help looks like a lot of work http://www.hometime.com/Howto/projects/drywall/drwl_8.htm
It could just be the knob is stripped there should be a cover that is round you should be able to remove it and there should be a screw the star ki...
I dont think you should of used spray foam insulation on your doors most door installer do not use it, because of when it drys it does expand causi...
I am not sure sorry I have never used it maybe someone else will see this request and be able to help
link for care http://www.paintsource.net/pages/products/waterlox/waterlox_faq.htm