Re: Updated parts link
Here is an updated link to the pump used on your machine: LINK > GE WPSE4200A0WW Pump Asm. Sorry for the inconvenience. Dan O. Appliance411.com The ...
Discussion History
Investigation required
** will someone tell me why I am having the same problem? ** On what exact model of refrigerator? You can find tips for locating the model and serial number...
0
answersupdated almost 10 years ago by DanO
Icemaker working?
. Is the icemaker making and dumping cubes into the ice cube bin? Dan O.
0
answersupdated almost 10 years ago by DanO
Details required
** there is a grinding sound coming from it every once in a while. ** From where on the appliance exactly? (see the following link). - My new refrigerator ...
0
answersupdated almost 10 years ago by DanO
Timer movement?
** Kenmore washer model 110.28912791 will not drain nor spin. ** Does the timer stop right at that part in the cycle and never move on on its own? A failure...
2
answers
updated almost 10 years ago by DanO
Possibilities depend on the design of the model
** Kenmore stove ** I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number. If you post it w...
1
answersupdated almost 10 years ago by DanO
Defective control?
** GE XL44 stove ** I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number ("XL44" isn't it)...
1
answersupdated almost 10 years ago by DanO
E1 = open thermistor
** [Kenmore dryer model 110.82826101] periodically showing the error code E1 ** That failure code on your model is suppose to indicate an electrically open the...
2
answersupdated almost 10 years ago by DanO
Keep an eye on it!
** [the defrost termination thermostat] could only cause the heater to stay on too long or not come on at all. ** I agree... besides the fact that the defrost ...
4
answersupdated almost 10 years ago by DanO
Lots of possibilities
** After washing, [dishwasher] leaves dirt particles on some glasses and dishes. ** That can be caused by too little water in the machine (after filling the wa...
4
answersupdated almost 10 years ago by DanO
Door latch switch problem?
** The door lock unlocked just fine after cleaning.tried using oven and all it says on screen is door. ** It sounds like the control 'thinks' the door is stil...
4
answersupdated almost 10 years ago by DanO
Things to check
You can read about common cooling system problems at the following link. Those possibilities will need to be checked at the time of failure. - My frost free r...
4
answersupdated almost 10 years ago by DanO
More details required
** ge washer [model] wwse5240gww has a loud dry like noise ** From where on the machine exactly? On what setting(s) does the sound occur? Dan O. www.A...
3
answersupdated almost 10 years ago by DanO
Clarification still needed
** it wasnt spinning becaus it wasnt draining ** The machine will attempt to spin whether it drains or not. The machine doesn't know the difference. If it s...
8
answersupdated about 10 years ago by DanO
Just won't drain?
** kenmore washer will spin but will not drain. ** On that washer design it should drain, the motor pause briefly and then when it starts up again start pinnin...
1
answersupdated about 10 years ago by DanO
Clarification needed
** it does evrything but drain ** You first stated it wouldn't "spin". Now you're saying it won't "drain". Has the problem changed? ** now its leaking ** ...
8
answersupdated about 10 years ago by DanO
Incomplete model number
** It is GE model: WMSR2100T. ** That model number is incomplete by 3 digits. Did you get it right off the machine's identification tag? In any case, all mo...
3
answersupdated about 10 years ago by DanO
Model number?
** top-load GE washer (14 yrs old) ** I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number...
3
answersupdated about 10 years ago by DanO
Fault code??
** the model 22082100 ** That looks to be missing the manufacturer's prefix number. The complete model number may be 110.22082100 What about the fault cod...
8
answersupdated about 10 years ago by DanO
Model number?
** Kenmore calypso washer ** I'm afraid that is not enough information to identify the appliance in question. What is needed is its exact model number. If you ...
8
answersupdated about 10 years ago by DanO
