Here's a photo of my rung locks on the ladder
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
When I could not find any replacement rung locks I made my own, from wood. They sit astride one rung and then any upper rung just sits on them. I w...
I am making a kitchen cabinet door with muntins laid out in a diamond pattern. I have completed the frame and cut the strips for the muntins. I tri...
While using my router on a piece of maple, I got some burn marks on the wood. Is there a way, such as bleach, to remove the burn marks, other than ...
Tammy, I know what you are going through. I am also on a well, and occasionaly a sulpher gas smell and/or iron bacteria smell presents itself. T...
Here is the picture of the rung locks in place. They do not attach to the ladder, just sit there when in use.When not in use, I store them seoparat...
Here are a couple of photos. As you will see they are not very sophisticated, just something I cobbled up in desperation. However I have used them ...
What I did was to fashion a pair of wooden blocks that sit on any rung I want to use as the bottom of the extension piece. I shaped them to fit ins...
No luck finding them. All potential sources wanted ladder manufacyurere name, model number, but this was gone from the ladder. So I made two of my ...
I am using DAP latex window glazing to repair some old windows. The instructions say to use a latex primer on new wood or an oil based primer on ol...
Has anyone come up with a good way to bend up small amounts of coil stock without using a brake? Has anyone come up with a do-it-youself design to ...
I too have a brick cleaning problem. I pulled off a 37 yer growth of grapevines from my brick fireplace chimney. Remaining is a residue of light br...
In Tom Silva's article on Pane Relief, he reccomends priming the rabbets with an exterior primer. I have been using linseed oil. Is this OK?, with ...
I have an aluminum extension ladder. Both rung locks are broken and I need new ones. Our local ladder supply said if it is a Louisville or Werner t...
I have a 35000 BTU propane furnace in my camp I would like to replace it. A gas fireplace would be nice. I wonder, though, would a furnace with a h...
I have a pair of sliding bypass doors. I would like to replace the things you stick your fingers in to operate the door. They are about 3 inches in...
I installed panel molding, using 1 inch panel molding in a "picture frame" design, in my front hall. I used the guidance from http://kingofcrown.co...
My son informed me there is a new ceramic tile product which is ceramic tile squares, each square is glued to a backerboard which is grooved so it ...
Juliedealer, We just went through a long process of choosing laminate flooring and took it all back to the store. Although your case is differen...