Wood floors
are hard to match without refinishing the whole things however. I am betting you may have this wood in a closet. a flooring contractor will be able to piece th...
Discussion History
Kemore Elite Calypso washer model numbers 11022066100, 11022062100, 11022082100, 3955333A, 110220641
The manual can be found on line here: http://www.managemylife.com/mmh/owner_manuals/7625/KENMORE-ELITE-Residential-Washers-L0710002?brand_name_search=22082100 ...
8
answers
updated over 8 years ago by Handyman
Venting the crawl space will let the cold air into the space
If you have pipes running through there you may risk them freezing. I am guessing below grade. no vents that risk is practically nil. Greg Webmaster www.bob...
5
answersupdated over 8 years ago by Handyman
Well
Since you did not post your location. It is harder to respond if your floors are insulated it would not matter where you lived i would go for ventilation. For ...
5
answersupdated over 8 years ago by Handyman
sorry
I don't think anyone is going to tell you how to disable one of the primary safety devices on your garage door. If they did they could be setting themselves up...
2
answersupdated almost 9 years ago by Handyman
a light sanding of the surface will clean it
power washing may damage. the folks at Western Red Cedar have all of the answers: Finishing http://www.cedar-decking.org/finishing_cedar_decks/overview.htm ...
2
answersupdated about 9 years ago by Handyman
Sylvan Answer me this
I think this product that was just blogged about does not make any sense. water going down the sink forms a vortex but it isn't strong enough to clean the stub...
1
answersdid it work for a month and stop working
Or did it never work. If its only a month installed call back that installer.
3
answersupdated about 9 years ago by Handyman
did a pro install?
Check to insure you have the proper ingredients to make this run: gas lines are not kinked or leaking at the unit or prior to unit. Make sure you vents to get a...
3
answersupdated about 9 years ago by Handyman
Air can not travel through glass
Glass can conduct energy which is why the double panes and inert gas sandwich. to prevent heat loss or gain (energy) from inside to outside. Drafts would be cause...
2
answersupdated about 9 years ago by Handyman
No 800
But the 811 has the track drive. Let me know if this link helps: http://www.managemyhome.com/mmh/lis_pdf/OWNM/L1001136.pdf
266
answersupdated about 9 years ago by Handyman
check the links here for plans
http://www.bobvila.com/wwwboard/messages/257310.html
19
answersupdated about 9 years ago by Handyman
Here it is
http://www.mathernsphotography.com/536_886510.pdf Just click on the link and wait while the pdf loads. you can then print it.
1
answersupdated about 9 years ago by Handyman
moisture level in the siding
direct sunlight could heat one side drying it out. While the other side maintains a constant moisture level. i am sure there are many other factors as I am not...
1
answersupdated about 9 years ago by Handyman
I think the answers in the plumbing section were pretty good
http://www.bobvila.com/BBS/Solid_Base_Slab_For_Toilet-Plumbing-1-F11014.html Local sources for something not required locally can be a hard find. Just try to ...
2
answersupdated over 9 years ago by Handyman
Call your Utility Company
They will do a home energy audit or suggest someone who can do it. Many home inspectors will also do this. but the equipment is expensive (infrared camera) so ...
2
answersupdated over 9 years ago by Handyman
You will need to talk to the manufacturer of
the ISBU as one is not like another. Here is a link to a manufacturer. It states to contact them for technical specifications: http://www.bslcontainers.com...
3
answersupdated over 9 years ago by Handyman
Bob Riley is fine
He has a contracting business on Cape Cod
1
answersupdated over 9 years ago by Handyman
This is from the artist
"for what it is worth the 2 paint colors used for the color wash are: Behr Premium Plus - interior semi-gloss enamel: Root Beer (240F-7) and Burnished Mahogany ...
2
answersupdated over 9 years ago by Handyman
