Humidity Feature
I don't know that you will find a full featured heat only thermostat that offers a humidity reading. But I do know that Honeywell has a new stat on the market tha...
Discussion History
Some of Trane's numbers aren't much help.
If you could, just post the full model number on here and I probably can look it up for you. Take care,
3
answersupdated over 16 years ago by heatpumpman
Can you find a model number on the unit?
The brand could be helpful too. Usually, the tonnage will be indicated with a series of numbers contained within the model number. 18 for 1 1/2 ton, 24 for a 2 t...
3
answersupdated over 16 years ago by heatpumpman
Here is a link to one brand.
http://www.intertherm.net/ Most all manufacturers make a package unit. They come available with just air conditioning, a/c and electric heat, heat pump, or air...
1
answersupdated almost 17 years ago by heatpumpman
That is perfectly normal.
The thermostat is designed with a 5 minute time delay built in. When you have walked up to it and changed the setting and it switches on immediately then the time...
1
answersupdated almost 17 years ago by heatpumpman
You're shopping for the best job.
Not the cheapest price. Reputation is worth more than gold, so poll as many folks as you can to find the company that does the best job. My experience has always...
3
answersupdated almost 17 years ago by heatpumpman
Can't help you with the covers...
But please don't put style ahead of safety. Observe all clearances recommended by the manufacturer. Please. You probably already are quite aware of this and playi...
0
answers
updated about 17 years ago by heatpumpman
No need to worry.
It's perfectly normal for a transformer to get louder as time goes by. If it gets too annoying then put in the request to have it changed anyway.
4
answersupdated about 17 years ago by heatpumpman
Most brands are fairly reliable.
Finding a good (great is even better) company to put it in is the key ingredient to a successful system, regardless of brand.
2
answersupdated about 17 years ago by heatpumpman
Air Balancing
Air balancing is what is needed. Look for a HVAC contractor that does air balancing and has the tools to do the job. It all starts with a room by room load calcul...
7
answersupdated about 17 years ago by heatpumpman
Might be a fan switch.
It's probably just a fan limit switch out of adustment slightly. Is the filter clean? It shouldn't hurt to let it go as is, unless it gets to cycling on and off ...
1
answersupdated about 17 years ago by heatpumpman
