it is possible
The truth is it is very possible that the milewcide used in a certain batch was bad . Sherma willaims painted 100 homes paint companies dont paint your home for f...
mattyd
Member since 02/04/04Discussion History
running paint
Not enough dry time between coats(if it a deep base color or your humidity is high you will need to wait more than 4 hours.) Over application Painting over ...
3
answersupdated almost 16 years ago by mattyd
mildewcide can smell
http://www.turnto10.com/consumerunit/1782342/detail.html Here is a link to a article about sherman williams admitting to a problem in there paint concerning mild...
50
answersupdated almost 16 years ago by mattyd
check this out
www.infotile.com I dont think it will be a problem , but i would ask the tile pros.
1
answersupdated almost 16 years ago by mattyd
paint store vrs. the big guys
It sounds like you own or work for a paint store. No disrespect was meant to you. I know the benifits of going to a paint store. I also know your constant battle ...
7
answersupdated almost 16 years ago by mattyd
20 off
benne moore regal wall satin 215 top of the line 23$ to 25$ could be more if it is a deep base color. behr 110 flat under 18.00 no matter what color & life ti...
7
answersupdated almost 16 years ago by mattyd
brands
all the above paints are good quality. I would pay attention to the consumer reports. if you know what you want shopping at a large home improvement store will sa...
7
answersupdated almost 16 years ago by mattyd
red
reds generally dont cover well so the average home owner do it yourselfer, tries to apply the product thicker because its not covering like normal colors. then th...
1
answersupdated almost 16 years ago by mattyd
red paint help
priming with a tinted primer would of helped but dont start over. Some reds take 3 to 5 coats. you make red out of a base with no titanium dioxide {white}. So you...
1
answersupdated almost 16 years ago by mattyd
Repairing an oil paint chip
the odds are you wont be able to touch up. old oil has yellowed the coller has changed it will be close to impossible to touch up.
3
answersupdated almost 16 years ago by mattyd
Painting a red wall!
Multiple thin coats with a day in between.
2
answersupdated almost 16 years ago by mattyd
Removing oil base stain from built in book case.
i HAVE USED IT AND IT DID DO A GOOD JOB I ALSO FOLLOWED THE DIRECTIONS, 99. PERCENT OF THE TIME NO MATTER WHAT PRODUCT USED IF THERES A PROBLEM ITS HUMAN ERROR .
9
answersupdated almost 16 years ago by mattyd
Removing oil base stain from built in book case.
I JUST REALIZED THE # IS 599
9
answersupdated almost 16 years ago by mattyd
Removing oil base stain from built in book case.
YOU HAVE EARNED MY RESPECT. MOST PEOPLE WOULD JUST BASH OR DOUBT. I WILL LOOK FORWARD TO HEARING THE RESULTS.
9
answersupdated almost 16 years ago by mattyd
Encapsulating
A garden hose is fine I would get a nozzle so theres a little pressure. I allways say prime and 2 coats of paint. We dont know what your painting over so its safe...
4
answersupdated almost 16 years ago by mattyd
Encapsulating
You can paint it yourself. If it is sound you dont want to paint over flaking paint and you dont want to sand it. I would prime with a water based or oil based pr...
4
answersupdated almost 16 years ago by mattyd
paint edger
its allways quicker to take off switch pates and door knobes then to tape them up or worry about getting paint all over them. i dont tend to by that stuff off the...
3
answersupdated almost 16 years ago by mattyd
crack between quarter round and wall
your on the right track i would scrape sand get of any thing that is not sound. i would then spot prime let it dry a day then use a spackle over the crakes and th...
1
answersupdated almost 16 years ago by mattyd
Staining Pine a DARK Ebony...need help.
i have descoverd that water- based stains dry so fast that they dont penatrate as much and tend to look more splotchy. you cant get bright colors in oil so if you...
4
answersupdated almost 16 years ago by mattyd
4 coats, 2 different paints, still streaking! Help!
dont press to hard let the roller do all the work and change directions
16
answersupdated almost 16 years ago by mattyd
