"painting a textured ceiling"
Rent a sprayer tape off the walls they make plastic that applys so easy.It comes in a 4 inch roll but pulls out to different lengths. Drop cloth yo...
COMMUNITY FORUM
Recent Posts
over 14 years by retisin
3
answers485
Views
"red paint"
red rooms, wow I still dislike them even after many years of owning my own painting business. My advice-Any other color you'd like? Just kidding ...
over 14 years by retisin
3
answers528
Views
cedar chest cleaning"
I do but will have to get back to you on this the product we used I simply can't remeber but can tell you tomorrow when we use it again.
over 14 years by retisin
1
answers1232
Views
"Sandblasting logs
I was wondering if you just plan on using a clear sealer on the outside? I am a log finsher/painter but specialise in custom log homes,and would li...
over 14 years by retisin
1
answers215
Views
"cedar logs
You could maybe find a place to cut some down and debark it yourself and then sand down with an orbital sander. Just a suggestion,because it might...
over 14 years by retisin
1
answers842
Views
"china hutch move"
What a great time for a sale?? No other ideas from me but is a good way to see if there is unwanted things or items.
over 14 years by retisin
1
answers958
Views
"splinters"
A good solid decking stain will help,c abots makes a good one.Just amke sure it is a decking stain and not just a solid color stain,big difference....
over 14 years by retisin
11
answers581
Views
"In-Ground Fire Pit for Wood Burning"
bare ground,keystone above ground,if you use the pit enough no mowing around it the heat kills the grass on the edges. I think this year we are go...
over 14 years by retisin
3
answers758
Views
"In-Ground Fire Pit for Wood Burning"
I will tell you what I did,may not be what you are looking for,but sure is quick easy and pretty. We tied a string around a spraypaint can and pus...
over 14 years by retisin
3
answers442
Views
"Gas in push mower oil tank"
I would take the oil drain plug out of the bottom instead of keeping it tipped overnight.
over 14 years by retisin
3
answers423
Views
"Low Voltage Landscape/Accent lights"
When we did ours I had a 3 inch trench dug for the wire took me 10 minutes to go around the house.Then we installed the lights made sure they worke...
over 14 years by retisin
3
answers386
Views
"Staining Pine Trim and Doors"
Take a door of from 1 bring it to the paint store and bring a pine board with you so they can do some color matches. You will not get the right co...
over 14 years by retisin
1
answers570
Views
"Self Propelled Lawn Boy"
Either that or there is an tension adjuster somewhere to adjust the slack so it will engage.
over 14 years by retisin
1
answers1286
Views
"Painting 'repaired' walls"
Are you sure that it isnt the patch job as if there is a raised surface then it wasnt repaired properly so painting over it will make it look bad,b...
over 14 years by retisin
1
answers307
Views
Primer
That is what I meant,but for some reason fingers typed topcoat.My bad
over 14 years by retisin
13
answers1018
Views
"Do you have to paint over primer"
# 5 im a painter I dont expect to get rich,LOL. Also insurance coverage for $1.5 mil up here is only $287.00 a year. I would rather do a complete...
over 14 years by retisin
9
answers730
Views
"Should I partially replace the cedar with something else?"
Now some things #5 agree on others we don't but that is the world we live in.We all have our own opinions and we will share ours with you,I won't g...
over 14 years by retisin
13
answers949
Views
"exterior paint removing"
Pros are yes it is quicker,and alot more easier. Cons-If you get to close or to much pressure you will damage your wood,most of the time paint is ...
over 14 years by retisin
3
answers977
Views
Do you have to paint over primer"
Thats what im saying #5 painting a ceiling is so easy i'd be glad to paint any new cap,it's the easiest their is to paint.Use a highbuild no backro...
over 14 years by retisin
9
answers312
Views
hers what I would set up
ok, 6 sawhorses 3 on eachside run a 2X4 from the 1st to the 2nd and then again one from the 2nd to the 3rd.Do this on each side.each 2x4 being at l...
over 14 years by retisin
13
answers474
Views
