architectural shingles
Is the starter course on architectural shingles the same as 3-tap shingles? I plan on applying daps of roof cement on every shingle for a sure hold.
Discussion History
Wall/Window A/C
I went to purchase a used window a/c and when it was removed from the window they stood it "ON END", [the dials are facing upwards]been like that couple of weeks....
0
answersThanks
Actually after I did a lil thinking and looked at the different receptacles I think it's all about the amps. I noticed the smaller 230v plugs are 15amp and 20amp ...
2
answersupdated over 14 years ago by Roofus
GFI's
You must have a GFI circuit that is been activated. GFI's are receptacles that are usually used around wet locations to prevent electrocution in wet/water/damp lo...
77
answersupdated over 14 years ago by Roofus
Different receptacles
What is the difference between the plug-in recepatcles over 200 volts? For instance my clothes dryer is a large 220v 3prong, and I see smaller 3prong plugs,[that ...
2
answersupdated over 14 years ago by Roofus
Drywall Ceiling...Texture
Installed 1/2" drywall ceiling,taped and joint-compounded all cracks and gaps. Will have textured/popcorn type finish sprayed on. Now do I need to skim-coat the r...
1
answerslil late
Sorry, get a guy with the "expanding foam" and never have to worry about insulating again,and it can get wet too and survive.
1
answersupdated almost 15 years ago by Roofus
Looks like...Sounds like....
Sounds like you have " blown in shredded type " insulation, not all insulation is fiberglass. Usually blown-in is made from recycled cellulose material and looks ...
4
answersupdated almost 15 years ago by Roofus
Antimicrobial Agent
What is " Antimicrobial Agent" and how is it applied?? My insurance is paying for it to be applied after my roof came off and my celing fell during a windstorm. I...
0
answersupdated almost 15 years ago by Roofus
Anti Microbial agent
What is " Antimicrobial Agent" and how is it applied?? My insurance is paying for it to be applied after my roof came off and my celing fell during a windstorm. T...
1
answersupdated almost 15 years ago by chemist1
Maybe?
Isn't it that "great stuff" foam insulation, just in a larger quanity?
5
answersupdated over 15 years ago by Roofus
DTV
Call Directv or maybe post this message on the>>>>> www.dbsforums.com
2
answersupdated over 15 years ago by Roofus
Nailer
What is a good all-around home-owner nailer? The rechargeable ones are what i'm leaning towards, any input is appreciated. I will use it to nail asphalt shingles ...
0
answersupdated over 15 years ago by Roofus
WOW
Looked around on the web and found NOTHING but bad things about this product, but thanks for any more input anybody has.
2
answersupdated over 15 years ago by Roofus
EDGE Snap TILE.
I saw this snap edge tile at a local home center, the one with the blue triangle out front,and wanted to know if anybody has it and what the drawbacks might be. I...
2
answersupdated over 15 years ago by Tileguybob
Check em out.
Check the box and look for warpage, i'm sure the one's you would get new from the store are stored the same way. If the flooring looks dry and not swelled how can...
1
answersupdated over 15 years ago by Roofus
Laser Level
I've got this "straightline" laser level, the one that resembles a tape measure. Now the laserlight beam comes out of the tool about 1" higher than what you have ...
0
answersupdated over 15 years ago by Roofus
determine; angle,degrees.
Thanks, yea some years ago i did cut a crown mould a few times before i figured out how to place in in the box, then it was EZ..lol Thanks for the help.
6
answersupdated over 15 years ago by Roofus
determine; angle,degrees.
I'm going to make an octagon around a round column using crown moulding and want to know how to determine the angle to use on the mitre box. Let's just say for th...
6
answersupdated over 15 years ago by whit.millwork
