go with glue down
Sounds like the wood has been over kilned. I had a problem with some Brazilian cherry wood about 2500 sq.ft. all way to brittle and would break apart when nailing...
Schwinn
Member since 10/01/04Discussion History
12 years old?
Matching the dye lot on tile that old is going to be a problem.
2
answersupdated about 15 years ago by Schwinn
level a subfloor
Floorwizard is perfectly correct in suggesting the use of Ardex. Read the guidlines for preping the area, its very inportant to make sure its is done correctly. ...
2
answersupdated about 15 years ago by Schwinn
Hardwood Flooring and humidity
You should install a humidifier on your furnace. Depending on the amount of wood you have in your home. If it is a small amount such as an entry foyer you could p...
2
answersupdated about 15 years ago by Schwinn
Quick tile repairs
I don’t know if you have fixed this problem by now but if you haven’t I’ll try and give you a hand. Hopefully you have tiles left over from the original install s...
3
answersupdated about 15 years ago by Schwinn
Finished edges
I would recomend using a Schluter system. I give a nice finish to exposed tiles and protects them from damage. http://www.schluter.com/english/products/2002/se...
1
answersupdated about 15 years ago by Schwinn
