your house plan
I originally posted a reply in the "200 newest posts" section, and it looks like it posted as a new post, so I am repeating it here. I can't read the dimension...
Discussion History
copper flashing compatability
A sheet metal sub is advising me that copper flashing is not compatable with stucco, and that I should use galvanized sheet metal for my weep screed even though t...
0
answersupdated about 14 years ago by sfe391
your house plan
I can't read the dimensions, so I'm not sure how applicable my comments will be, but here goes: 1. The house appears to mass up nicely under the roof plan. Th...
2
answersupdated about 14 years ago by sfe391
Air conditioning blower speed low.
I have a Janitrol warm-air furnce which we fitted with a 3 ton cooling coil to cool our downstairs HVAC zone, which is 1200 square feet in Oakland, CA. The heati...
0
answersjanitrol
Okay. For the lower zone, a UAdeltaT calc at a 1% design temp yields 4,200 btu/hr. The west glazing gains a max of 12,050 btu/hr per ASHRAE solar heat gain fact...
2
answersupdated over 15 years ago by sfe391
Janitrol Furnace Info
Thanks for the reply. I realize that cooling load calcs would answer the load question, but I was looking for a rule of thumb answer. The house is 4 years old, ...
2
answersupdated over 15 years ago by sfe391
Janitrol Furnace Info
Hello all: I'm new to the board and hoping someone can help me. I have two conditioned zones in my house with a Janitrol GMP N0804 REV B in one and a Janitrol...
2
answers
