Thanks
Thank you for your replies. I went to Lowe's and got my pipe joint in a tube that said it was good for both plastic and metal. That appears to have done the t...
Discussion History
flared fitting
It's not dripping where the flared end goes into the hose. The drip is where the male end screws into the pan. This is what the piece looks like http://ima...
2
answersupdated over 14 years ago by TedMetro
Condensate pan / drain line problem
My condensate pan has a plastic pipe (female connector) coming out of it 90 degrees horizontally perpendicular to the floor. There is a flared male connector ...
2
answers
Figured it out
Went behind the furnance and poked around and that's part of the automatic humidifier attached behind and above the evaporator coil. Discovered a new problem, ...
1
answersupdated over 14 years ago by TedMetro
A/C Split System - Evaporator chamber question
I used the A/C for the first time yesterday and opened up the panel to the evaporator coil to take a look at everything. Above the Evaporator coil there is the...
1
answersFurnace blowing with thermostat off ?!?
I don't know how long the problem has been occuring, because I just noticed it yesterday. It has started to cool down so I turned off the thermostat. I then...
0
answerssand
Just a follow-up... We spoke to a woman at Lowe's Paint area that suggested we paint over the wall with two coats of a primer. She said that would smooth out ...
18
answersupdated over 15 years ago by TedMetro
Painting over sand-textured wall
I just bought a house and that dining room wall is painted and has a weird sandy texture to it. I want to repaint the wall but I am concerned that if I paint ove...
18
answersupdated 4 months ago by BV023367
