Do not use glue or adhesive
For composite decking, you should use screws 2 1/2"(stainless steel). the sleeper system should be made with: treated lumber 2x4 or 1/4 make a frame using 2x4...
thedeckguy
Member since 03/03/09Discussion History
concrete slab & composite decking
I used TimberTech 5/4 product over my concrete slab. I used 1 1/2 sleeper system and attached the 5/4 product to that. The product was just over an 1" So...
3
answersupdated about 12 years ago by thedeckguy
redecking
depending on how old your deck is, I would recommend having a Structural Engineer examine the framing before I resurface the deck. If you have joists that are wa...
2
answersupdated about 12 years ago by thedeckguy
install error
I don't think your problem is with TimberTech, more your contractor. I have seen this before no ventilation? right? It's most likely boxed in or an on grade ap...
77
answersupdated about 12 years ago by thedeckguy
