Tour of an Affordable Home

Clip Summary

Bob and developer John Druley walk through a home under construction by Quaker Homes in Falmouth, Massachusetts. This standard design is used for both the market-priced and affordable homes. The overall dimensions of the house are 26 feet by 36 feet. A center-door entry leads to 13-by-18-foot living room on one side and a 16-by-13-foot master bedroom on the other. The back of the house has a 13-by-18-foot kitchen with a back door and a window onto the backyard, a half-bath and laundry, and an entry to the master bedroom with full bath, tub-shower combination, double-bowl sink, and linen closet. The upstairs has two bedrooms with operable skylights and a full bath. This three-bedroom, two-and-one-half bath Cape will be lotteried as an affordable home to eligible families who make between $29,000 and $65,000 per year, and who qualify for a traditional mortgage. The home is stick-built with traditional 2X4 framing, oriented strand board (OSB) exterior sheathing, low-e glass, tilt-in vinyl windows, and gas heat. Bob and Druley point out that an affordable home must be affordable to operate and heat as well as being affordable to purchase.