06:46PM | 01/23/00
Member Since: 01/22/00
2 lifetime posts
I was installing track lighting in my kitchen this evening when I encountered a problem. Wiring from the ceiling was white, black and Red. Naturally I connected white with white, black with black, and I assume(d) that red was some sort of ground. I then connected the red with the green from the light (ground I assumed again).

When I turned the power on again, sparks flew and tripped the breaker. I then disconnected the red/green wire, and the light turned on no least I thought. The switch no longer works, so I can only turn the light on and off with the breaker.

Is this a major problem, or is it just the switch I blew. Also, what do I do with the red it for anything?


03:53AM | 01/24/00
Member Since: 10/19/98
223 lifetime posts
The red wire is usually used with a 3-way switch, so it would also be hot. You need to investigate the wiring at the switch(es) to get as better idea of how they are wired.

Are you replacing the existing light with the track lighting or adding additional lighting?

Is the light switched by 2 (or more) switches?

Post again with the answers and the wiring scheme in the switches.


06:00AM | 01/24/00
Member Since: 01/22/00
2 lifetime posts
The light switch actually does not have a 3 way switch..

I am replacing the existing light with the track lighting.

On the switch itself, the black and red wires are hooked up to the switch.

Let me know if that helps.


02:29PM | 01/24/00
Member Since: 10/24/99
31 lifetime posts
Dear jhami:

The application you described sounds like what some of us in the trade call a "feed through", the black and the white wires were already spiced to another set of white and black wires correct? (I'm assuming they are)
Just splice the black wire of the track lighting to the red wire and make sure the power is of before you do this. Then restore power and the switch should work the lights.
Let us know how this works out.



Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.


type the code from the image


Post_new_button or Login_button

Colorful, useful, and fun, these tire planters form the foundation for a delightful container garden. Just spray-paint old... Reused steel windows create an eye-catching splashguard in this walk-in shower. The vintage factory windows bring an inter... A galvanized steel tub is a surprising but charming fixture in this bright and breezy screened patio. It's perfect for was... If you're not crazy about the idea of commingling plants and pool, this modern variation may be more to your liking. The s... Yes, a freestanding garage can become its own tiny house. Artist Michelle de la Vega has all the comforts of a modern resi... If you lack plumbing skills but have a good sturdy tree, here's the easiest outdoor shower solution of all: Simply attach... Pursue what's known as the stack effect. To achieve it, open the windows on both the upper and lower floors, and as warm a... How do you like this smart use for an old bottle? Clamp an empty wine bottle to a fence or wall near your outdoor deck or ... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... Twine lanterns add pops of crafty—but sophisticated—flair to any outdoor setting. Wrap glue-soaked twine around a balloon ... When securely fastened to a tree or the ceiling of a porch, a pallet and some cushioning make the ideal place to lounge. V... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... For the cost of a can of exterior paint , you can totally transform your porch. Paint the floor a hue that complements yo... In this urban apartment, a standard-issue patio became a serene and green perch by replacing the typical concrete with gro... This garden shed has been decked out to the nines. Designer Orla Kiely created the intimate home for a flower trade show, ...
Newsletter_icon Google_plus Facebook Twitter Pinterest Youtube Rss_icon