I just bought a complete 7x9 (?)- and was hoping to get newer parts- but I see thats not going to happen. Here is suggestion for those who need skylights- find plastics supply distributor- Cadillac Plastics is one in the FT Worth area- then buy 1/8" piece 2 inches wider than roof opening. Clean roof thoroughly with soap water, dry, then clean with acetone- lay new acrylic piece over curvature of roof and heat with a hairdryer until hot it will then fit roof curvature- glue down with silicone sealant.
This should work for months (years) but can be
replaced easier than finding parts. right? So when you buy the 1/8" clear acrylic- go ahead and get second piece- that way you will never need it. :)
ALSO, when disassembling this one I just bought,
the seam between window panel and it's ajacent panel cracked- hmm so I'l try using the metal adhesive backed tape used in a/c Heating duct work- the adhesive is thick and very sticky and resist heat / cold well. Anyone with extra parts please contact me @ [email protected]