Latest Discussions : Electrical & Lighting


10:05AM | 03/26/05
Member Since: 03/25/05
1 lifetime posts
My Kenmore Elite Dryer Mod# 110-70072991 is showing error code PF. Three (3) quick beeps, will not take any setting other than cotton, number 19 is diaplayed in the timer window, and the red check lint screen light is blinking. The lint screen is clean and the unit wiil not reset after it is unpluged from the 110v source.

Help anyone.


09:42AM | 03/27/05
Member Since: 07/23/04
491 lifetime posts

Haven't seen an PF fault code, but have seen a PF mean Power Failure.

**Three (3) quick beeps,**

That is often caused by a faulty temp thermistor and the unit beeps and quits.

Thermistor control for dryer.

The thermistor can be checked/ohmed ( some have shown ok when cool and fail when powered up ) as per the tech sheet that comes with the dryer.


Appliance Repair Aid


10:17AM | 04/14/19
my dryer starts working normal then after maybe 10 minutes it stops and says PF and stops, any suggestions?

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button