Latest Discussions : Tools & Workshop


03:40AM | 01/21/03
Member Since: 01/20/03
2 lifetime posts

I borrowed a Zircon the other day, and it just went bonkers

The house is pretty old- 1924; anyone care to guess on the stud spacing and if it will be consistent?


mini me

04:24AM | 01/22/03
Member Since: 12/09/02
66 lifetime posts
the only safe bet is that the stu spacing probably won't be consistant...did the stud sensor you were using have a deepscan mode on it...if not try one that does....i have had pretty good luck with those in the past with plaster walls...


06:14AM | 01/22/03
Member Since: 01/20/03
2 lifetime posts
Thanks for the reply. Yes, it had deepscan and I tried it. It did seem to find one stud, but it was the only one indicated in a 9' long wall (there were some other blips, but nothing as good as the one) and the one it did find was about 2.5' off of one edge...

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button