08:56AM | 01/29/07
Member Since: 01/28/07
2 lifetime posts
I have a head scratcher of a problem. I was using a power tool in the workshop in my basement. poof, the power to that outlet, and lights in the area went out. I naturally assumed that I had tripped a breaker. Went over to the panel, nothing noticeable, so I tripped them all off and on just to be sure. No luck. So I checked other areas on the same circuit, they all still had power. Checked the outlet, open lines, checked the junction box that feeds the lights and the outlet in that area, still open wires. Since the other lights and rooms on that circuit are still functioning, I can only assume that there is junction box in between somewhere that suddenly decided to disconnect. To figure out where that would be I would need to tear down walls and ceiling to trace the wires. Does anyone have an suggestions on a better way of diagnosing and finding where the problem is? Also I was curious if this is a common occurrence, it seems odd that there is suddenly no power to that wire.

Thanks for your responses.


09:27AM | 01/29/07
Member Since: 03/31/05
265 lifetime posts
Since this is in a basement, you may have a GFCI receptacle (rectangular receptacle with "test" and "reset" buttons) protecting a portion of that circuit. This could be hidden behind something, so look carefully. If you find one, press the reset button and see if things work again.


09:42AM | 01/29/07
Member Since: 01/28/07
2 lifetime posts
I have checked for that, we have 2 GFCI receptacles in the basement and 2 upstairs, I checked them all and reset them all. But they're all on different circuits than this one.

But thanks for your response, a great suggestion.

Tom O

11:42AM | 01/29/07
Member Since: 09/17/02
477 lifetime posts
If you're lucky enough to know exactly which receptacles and lights are on the circuit that is causing the trouble, you will have to start examining connections at outlets and lights that are still working. Most of the time, wire is run from device to device or light to light in a daisy chain fashion. A bad connection could occur at a device or light that is still working.

Wire going bad in a middle of a run is extremely rare and buried junction boxes do happen, but not very often. Try checking connections as I said before busting open walls & ceilings.



07:29AM | 02/10/07
Member Since: 08/03/05
20 lifetime posts
what has happened to you is very common, about 1 out of 15 residential service calls I get are caused by exactly what happened to you. Your devices (switches and receptacles) are "speed wired" or "Back stabbed", a very poor wiring practice that is used by many electricians to save time.

Insted of putting the wires under the terminal screws, they are shoved into the back of device where they are held by two very thin strips of metal. After time these connections give up. What you need to do is TURN OFF YOUR POWER !!, remove each outlet ( its almost always outlets) in the vicinity of the problem ( find them by turning off just that circuit and dealing with whats dead) and either replace them using the screw terminals on the new outlets, or remove the wires from the back by pulling and twisting at the same time, and put the wires under the screws of the old ones. If you don't know how to do this or dont feel comfortable doing it at least tell you electrician when you call him that you are pretty sure its a back stab problem. This should save you a pretty good bit on your bill as he will think that if you know what the problem is you also know how easy it is to fix.

Click to reply button
Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

To test the boundaries of small-footprint living, interior designer Jessica Helgerson moved her family to a 540-square-foo... Filling an underutilized area beneath the stairs is a smart way to save space. Doing so with a stash of wood, however, is ... The Audubon Society inspired wallpaper in this Adirondack-styled mudroom will get you in the outdoor mood. Grab your coat ... Chalkboard paint opens up endless possibilities for customizing your dresser time and time again. Use chalk to label the c... A fireplace in the bathroom creates the ultimate setting for relaxation. Homeowners often choose electric or gas over wood... This roomy boot tray made from punched metal stands up to all the elements. Station it in your mudroom or at your back doo... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... FLOR tiles are an affordable way to customize a carpeted floor covering for any space. Make anything from runners to wall-... Chalkboard paint features prominently in this elegant yet unpretentious headboard design. Add a new message daily to reflec... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... The indecisive homeowner need not fret over choosing one (or even two) cabinet colors. The kitchen cabinets in this artist... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... First dress up your metal shelves with a coat of paint in an accent color that complements your kitchen decor. Then arrang... Dark wood shelving and a matching upholstered bench keep this closet sleek and refined. The large window brightens the sub...
Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon