Hi:
I just had my kitchen floor redone, and the final coat of polyurethane went on today, and I stepped on it before it was dry and made a couple of footprints. Does anyone know how I can spot treat them? Should I sand them and redo that area? Any advise would be welcome!
Thanks,
Cybele
depends on the severity of it.
I would call the firm and have them professionally repair it.
if that isnt an option, for whatever reasons you may have, then you can try buffing/screening it out. If it is deep and that doesnt work, you can screen/sand/recoat, and repeat as neeeded, but you would want the exact products used for this.
it really is a repair for the professional, so if there is any chance of getting the finishers back, i would do that.
_____________________________________________
There are two ways to do any job. The right way and the wrong way. Do it right everytime.
_____________________________________________
http://flooringworld.org
_____________________________________________
I would call the firm and have them professionally repair it.
if that isnt an option, for whatever reasons you may have, then you can try buffing/screening it out. If it is deep and that doesnt work, you can screen/sand/recoat, and repeat as neeeded, but you would want the exact products used for this.
it really is a repair for the professional, so if there is any chance of getting the finishers back, i would do that.
_____________________________________________
There are two ways to do any job. The right way and the wrong way. Do it right everytime.
_____________________________________________
http://flooringworld.org
_____________________________________________