Latest Discussions : Plumbing

kirkpatrick

07:23PM | 10/19/99
Member Since: 10/18/99
1 lifetime posts
Hope someone out there can help with this! During the installation of a one-piece tub/shower unit a small hole about the size of a quarter was accidently poked through the fiberglass. The hole is located not actually in the tub portion but a little higher where the shelf or soapbar is on the wall part of the unit. Please advise as to the best method for repairing. Hopefully someone knows a way so that the hole will be undetectable. Many thanks in advance. Glo

BV003266

07:13PM | 02/15/14
At the end of installing a porcelain tub,a quarter sized chip, down to the steel, occurred. Do you have any recommendations on a good product to use to repair this?
Image

David, Moderator

10:54PM | 02/15/14
Member Since: 11/15/13
264 lifetime posts
In reference to the porcelain tub.
I have never had to patch a porcelain tub. I found this company online http://www.surface-repair.com/
I also noticed that Home Depot has a product.
Thanks
David


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register