Hi,My kitchen facet is only 2 years old and when I turn it on nothing comes out.The sprayer works and also my dishwasher but, nothing from the facet.Any help would be appreciated, thanks.
remove the end of the gooseneck (or whatever style you have) where the water is supposed to come from. There should be a screen in there that may be clogged with debris.
Clean it out and re-install
Clean it out and re-install
Is the pipework galvanised or copper in your house?
If it is galv & probably old it has a nasty habit of corrosion build up inside. The hot is worse than the cold.
If neither the hot orcold is working a chunk of corrosion could have travelled to the mixer pipe & blocked it.
Switch off the isolator taps under the sink. take off the pipe attachment to the faucet get a bucket. Put the pipe in it & open the isolator tap. This will tell you if your problem is within the faucet or further down the pipes.
If it is galv & probably old it has a nasty habit of corrosion build up inside. The hot is worse than the cold.
If neither the hot orcold is working a chunk of corrosion could have travelled to the mixer pipe & blocked it.
Switch off the isolator taps under the sink. take off the pipe attachment to the faucet get a bucket. Put the pipe in it & open the isolator tap. This will tell you if your problem is within the faucet or further down the pipes.