Latest Discussions : HVAC

jm1947

06:45PM | 07/10/07
Member Since: 07/09/07
1 lifetime posts
We just had a new tankless Weil Mclean boiler installed.The other night as I was showering my wife decided to use the washing machine.The result was no hot water or pressure in the shower.This is one of the reasons we replaced the previous burner.The washer is closest to the furnace.Do you think this is a furnace problem or a plumbing problem?Thanks.

yellowcorvette4

11:16PM | 07/18/07
Member Since: 07/18/07
6 lifetime posts
The 1/4"-3/8" hot water pipe routed from the washer to the shower is too small in diameter.

Options: Replace hot water pipe from washer to shower with 3/4" preferable OD or 1/2" min.

Option 2: Route dedicated 1/2" pipe from tankless heater directly to shower.

Option 3: Locate tankless heater between washer and shower.

Option 4: Remove/resize the water restrictor from inside the shower head but don't tell Trentt Lott/Ali Gore/Ted Kennedy.

www.cornstoves.info

www.amaizablaze.com

www.msnusers.com/cornstoves

www.msnusers.com/tennesseecornstoves

www.groups.yahoo.com/group/cornstoves

www.groups.yahoo.com/group/cornplace


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register