- Walls & Ceilings >
- Bob Vila Radio: The Right Height for Chair Rails
Bob Vila Radio: The Right Height for Chair Rails
Chair rails remain a popular option for dressing up interior walls, but while their installation can be straightforward, homeowners need to know where on the wall this type of molding looks best.
Chair rail molding adds a tasteful touch to rooms, especially when combined with wainscoting or crown molding. But if you’re thinking of installing chair rails, here are a few points to keep in mind.
Listen to BOB VILA ON CHAIR RAILS or read the text below:
To be the most visually appealing, chair rails need to be installed at the right height. Most experts say that ‘right height’ is about one third the distance from the floor to the ceiling. So for a room with an 8-foot ceiling, you’d want to nail the molding about 32 inches from the floor.
The best width for chair rail molding will vary a bit, depending on the dimensions and the wall color of the room. Two to three inches is most common.
Chair rail-type moldings were used as far back as the Greeks and Romans. But the term ‘chair rail’ didn’t come into common usage until the 19th century. That was when Shakers installed pegs in their moldings. Their purpose? To hang chairs out of the way during sweeping and mopping!
Bob Vila Radio is a newly launched daily radio spot carried on more than 60 stations around the country (and growing). You can get your daily dose here, by listening to—or reading—Bob’s 60-second home improvement radio tip of the day.