Get Help from Bob Vila
- Give-Aways & Offers
- Monthly Must Do's
- DIY Project Ideas
- Step-by-Step Guides
- Inspirational Photo Galleries
Here’s how to lay a no-squeak subfloor. Apply a generous bead of panel adhesive to the tops of your floor joists. Lay sheets of 3/4-inch tongue-in-groove plywood, staggering the joints as you go. Use a sledgehammer against a two-by-four to drive the plywood together tightly. Secure each sheet in place with galvanized eight-penny flooring nails.
For more on flooring, consider: