2) I had planned to use extruded aluminum panels 5 1/4 x 1" as both a radiant panel and a moulding. Original model was by danex. Any ideas on who produces this type of panel.
radiant panels
1) recently I saw an electric radiant panel that was glued under ceramic tile and need the contac information
2) I had planned to use extruded aluminum panels 5 1/4 x 1" as both a radiant panel and a moulding. Original model was by danex. Any ideas on who produces this type of panel.
2) I had planned to use extruded aluminum panels 5 1/4 x 1" as both a radiant panel and a moulding. Original model was by danex. Any ideas on who produces this type of panel.
Post a reply as Anonymous
Related Discussions
Flickering lights then blown fuse
We recently moved and a couple weeks ago I noticed one of the bedroom ceiling lights were flickering I turned it off then back on an...
2
answers
5 days by BV020802
Remove an old bumper sticker from a tool cart
I just purchased a used metal tool cart. Someone had put a bumper sticker on the front of it. It looks tacky. What is the easiest wa...
2
answers3 days by BV020820
Kitchen Desk between my pantry cabinet and a stock 3 drawer base cabinet
I will have a 56 inch piece of granite that matches my counter tops as my desk top. It will be supported on one end by a base cabine...
1
answers30 days by BV020594
