Latest Discussions : Bathroom

BV024828

11:38PM | 04/05/21
My contractor put in a frameless shower. The gap between glass and door is wider at the top than the bottom due to bowed wall.
The caulking where the tile meets the glass is thin at the top and really wide going down to the bottom.
Now they want to fix the problem by adding a plastic piece over the gap to prevent water from spraying onto my floor.
Is there a industry standard in the gap allowance between wall and glass? The widest on mine is 1/4 inch.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register