Approx 10 yrs old.... model #110.97281100,
trying to guide my brother (long distance)over the phone.
He has the new motor... Guided him thru the release of the spring steel clips (pulley side and blower side)
He is telling me the motor will not release from the back (blower end)
Is there a trick to this seemingly simple problem?
Has he removed the blower fan? If not, that'll have to be done before the motor will come out.
BTW. Blowers are usually screwed on with a left-hand thread. The following image might help with that:
LINK > Removing Blower Fan Tip
Dan O.
www.Appliance411.com
The Appliance Information Site
=Ð~~~~~~
Kenmore gas dryer 110.72942100 purchased 2001 I've heard the unit make a few squeeks and then within a few seconds watched the mo...
3
answersHi, I have a Kenmore Dryer whenever I turne it on every thing works but it does not produce any heat at all do you have any idea wha...
2
answersI have a kenmore heavy duty 60 series dryer model#96566200, ser#ME3046039. I don't know if the heating element is not working cause ...
1
answersThe dryer stopped running, but after giving the barrel a push the dryer started working, it overheats (won't turn on until it cools ...
0
answers
