01:13PM | 07/24/08
Member Since: 07/23/08
1 lifetime posts
Thank you so much Dan for sharing the link to that slide show. It was truly a time saver for us.


09:43AM | 08/21/08
Member Since: 08/20/08
1 lifetime posts
model# is 82872100, Serial# is 09510728. The timer moves along just fine making the clicking sound as it goes around, it's stopping at the Rinse/Spin cycle. All it does is make a buzzing noise almost like the motor is running but can't go any where. It stops then goes again until it finally gets to the done/off but there is still water in the tank.


11:33AM | 09/03/09
Member Since: 09/02/09
1 lifetime posts

My 70 series Kenmore washer also will not advance. My machine model # is 110.82370800. The washer seems to working on all functions except I need to manually advance the timer knob or it will stay the same place and runs forever. How to I determine if I need a lid switch or a timer.

Thanks so much for any advise.


07:48AM | 09/10/09
Member Since: 11/11/02
2271 lifetime posts
** I need to manually advance the timer knob or it will stay the same place **

It won't advance by itself *at all* or at just at select points in the cycle?

** How to I determine if I need a lid switch or a timer. **

If the timer's motor was being powered the timer should be advancing. Power there but NO movement = defective timer.

- Kenmore 110.82370800 Washer Timer



Dan O.

The Appliance Information Site



10:35AM | 06/13/10
Member Since: 06/12/10
1 lifetime posts
lid switch ! i JB welded that sucker. worked like a charm.


12:05AM | 01/23/14
I replaced my spin gear put everything g back together forgetting to tighten the water pump clams it did 3 loads perfectly until drain hose on water pump came off water everywhere so I went back in and put clamps back on and now the washer won't drain, did something possibly get wet??


11:05AM | 04/09/14
My 70 series won't drain or spin but timer goes until cycle is complete, but when I open the washer its full of water. It appears to attempt to spin but water won't drain.


09:04PM | 06/05/14
Thanks for the advice on the lid switch. Simple, inexpensive fix that saved me from giving up on a 14-yr-old washer.


01:06PM | 09/06/14
Member Since: 09/06/14
1 lifetime posts
I have a Kenmore 70 series model-110.24722300 serial # CS0263820 that will not drain and go into spin. How can I fix it?
Click to reply button Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon