Latest Discussions : Tools & Workshop

dhoenisch

07:17PM | 05/19/05
Member Since: 05/18/05
9 lifetime posts
I just purchased this same saw last week at an estate sale for $65. Works excellent! All original, even the belt, though I have to replace it ASAP. If anyone can give any information on this saw as well, I would greatly appreciate it. Also, if you have an owner's manual, I would be happy to pay someone to make a copy and send it to me. Let me know please.

laspain

07:22PM | 05/19/05
Member Since: 03/29/05
6 lifetime posts
I am still in search of a manual. I am in the middle of a complete rebuild of my saw. My grandad really used it and it needs a lot of love. If you need any parts or have any questions about it drop me a note. I have learned a lot about current parts available, the open lubricated arbor bearings, etc. My email is laspain@aol.com and I would love to see a phtot of one in good shape if you can spare it.

Larry

L.Spain

dhoenisch

07:32PM | 05/19/05
Member Since: 05/18/05
9 lifetime posts
I will be happy to take photos for you. The only issue with mine is the Rip Fence has been rigged due to a broken part from the previous owner, but they rigged it and it works well, so not much of a need to fix it. The saw is at my mom's house in her basement. I should be there this weekend, maybe even tomorrow evening. I will get the pictures to you as soon as I can. Also, if you go to http://www3.*****.com, you can print out a diagram that may help you out.

crockett

12:26PM | 06/09/05
Member Since: 06/08/05
3 lifetime posts
All righty right. I just posted that I have the RAS manuel and I guess my dad shopped at the same store because I'm about to go look but I bet I've got the same Table saw.........If so I'll let yall know shortly.

Allen

crockett

12:46PM | 06/09/05
Member Since: 06/08/05
3 lifetime posts
I have the 113.298141 - 298031- 298151 Craftsman 10 inch table saw manuel (Circa Mid 1970s) if it will help. Let me know and I can make some copies.

Allen

dhoenisch

06:47PM | 06/09/05
Member Since: 05/18/05
9 lifetime posts
Thanks, Crockett. laspain gave me a copy of the manual for the 113.27520, 113.27521, and 113.27610 model saws, which seem to be identical to mine. I appreciate the offer though. Thanks.

Jierdan

05:44AM | 01/06/06
Member Since: 01/05/06
2 lifetime posts
Could you send me a copy of the manual I have a model 113.27520. Trying to find parts and info on the model now.

Thanks,

Rusty

dlkendall

06:31AM | 03/16/06
Member Since: 03/15/06
1 lifetime posts
I am looking for an owner's manual for a Craftsman Table Saw model 113.27520 which was given to me.

Can anyone tell me how to get a copy?

Thanks

hemminm

06:55PM | 07/07/06
Member Since: 07/06/06
1 lifetime posts
An old posting shows you might have this manual and might be willing to make copies. I just acquired a saw with this model number and would be interested in getting a copy of the manual. Thanks for any assistance you can give me.

johnsc

03:21PM | 08/13/06
Member Since: 08/12/06
1 lifetime posts
I am also looking for a manual for my Craftsman Table Saw (113.299142). I saw your post however the web site is blocked out, can u post it again or possible send it directly to me at jgs@emailaccount.com it would be greatly appreciated. Thank you

mrfred

05:11PM | 02/08/08
Member Since: 02/07/08
3 lifetime posts
I have an original manual in great condition. Please advise if you still want a copy. The saw was likely purchased in 1952-3.

mamabear1

02:44PM | 02/09/08
Member Since: 02/08/08
3 lifetime posts
I am dlkendall, who posted the origninal inquiry for the 113.22411 Craftsman manual. If you have it, I would like to find out how to get it from you.

You can contact me at dlkendall@hotmail.com

Thank you

Dave

mrfred

04:12AM | 03/15/08
Member Since: 02/07/08
3 lifetime posts
I have copies of the manuals for the saw and Capatitor-Start 1 hp motor. I believe I sent you two emails. Please contact me with your address and I will send to you.

mrfred

04:27AM | 03/15/08
Member Since: 02/07/08
3 lifetime posts
I have a copy if you want it. Please see email on this thread.

mamabear1

07:00AM | 03/15/08
Member Since: 02/08/08
3 lifetime posts
Mr. Fred-

Thank you so much for not giving up on this. For some reason we didn't get the emails, but mailing address is PO Box 6011, Big Bear Lake, CA 92315.

Much Appreciated.

Dave Kendall

junkjunkie9

05:14PM | 11/04/08
Member Since: 11/03/08
3 lifetime posts
Hi, I don't have a manual, let alone a motor for my saw. Can you please give me information on the motor you have? I need to know what horse power it is or anything else it says on the motor plate. I need to get a motor as close to the original as possible. If I do get a manual, I'll be sure to alert you. Thank you, john

junkjunkie9

05:18PM | 11/04/08
Member Since: 11/03/08
3 lifetime posts
Hi, any way I can buy a copy of your manual for my saw? You can reach me at JohnRam150@aol.com. I just got my saw, but it has no motor! Please help me. Thanks, John

doug seibert

04:01AM | 11/05/08
Member Since: 08/10/02
842 lifetime posts
Here is some info for your Saw # 113.27520.....the first is the Manual archived on the OWWM site as a PDF

http://www.owwm.com/pubs/222/1999.pdf

The second is a Sears Pamphlet circa 1960's about understanding and selecting the right motor for your saw

http://www.owwm.com/pubs/222/586.pdf

"......measure Once.....cut Twice....

throw that one away and cut a new one...."

mamabear1

05:02AM | 11/05/08
Member Since: 02/08/08
3 lifetime posts
Here is the information on the table saw that you requested:

3/4 horsepower capacitor motor

Ball Bearing, 3450 RPM, 115 v.

60 Cycle, 9.3 AMPS, S/N 04 52

Model 115 7167, Type CR260X20

Sears Roebuck & Co.

BubbaBrown

08:11PM | 10/02/09
Member Since: 10/02/09
1 lifetime posts
I'm also looking for a copy of the manual to 113.27610 - 10" craftsman table saw. Can I get a copy from you?

Steve


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register