Latest Discussions : Tools & Workshop


04:55AM | 10/03/08
Member Since: 10/02/08
2 lifetime posts
This 10" saw was made by Atlas Press around 1940. I am interested in any info or parts that may be available, especially a fence.


10:38AM | 04/09/09
Member Since: 09/16/05
1 lifetime posts
I have the fence, but if you are looking for the cranking part,I

don't have it. What other parts are you looking for?


09:00PM | 04/11/09
Member Since: 10/02/08
2 lifetime posts
I am missing a few things from this saw:


Miter gauge

Blade guard/splitter assembly

Side covers

1 crank handle

Tilt lock screw

Are you saying that you have the basic fence body, but not the complete fence? I do have the fence rail, but that is all.



02:31PM | 12/26/15
I have the same model no. saw. I`m looking for the gear rack for the blade hight. I had the original motor rebuilt...the fence is slightly twisted and needs to be straightened, but the saw is right on! I`m missing a side cover and maybe the rubber boot that attaches to the blade surround for dust collection. Also, the cast iron motor attachment bracket that the 3/8ths pin travels through is broken...I made one out of maple (the tray that holds the motor, but would to have the original motor mounting plate. Rick


07:22PM | 12/30/19
Are you still looking for parts? I have a complete saw that I am willing to part with.
Kevin B


06:10PM | 01/06/20
Do you have the complete Saw Guard Assembly?

Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button