Latest Discussions : Plumbing

derrikd

12:12PM | 08/20/03
Member Since: 08/19/03
4 lifetime posts
I am wondering if anyone has any ideas on how to run plumbing (shower) through block (glass or otherwise). Essentially I am looking to have an entire enclosure made of glass, and dont know if there is a way to runthe water up...
Derrik

joed

06:13PM | 08/20/03
Member Since: 09/17/02
524 lifetime posts
I think you should be able to run a pipe though the corner where 4 blocks meet.
It is also possible to drill glass with water cooling and the proper bit.

derrikd

06:25AM | 08/21/03
Member Since: 08/19/03
4 lifetime posts
Has anyone done this? Or, how about acrylic blocks? The drilling part I mean.

Thanks for your help, great idea.

donmurray

12:46AM | 08/24/03
Member Since: 08/23/03
1 lifetime posts
I've done some work with acrylic, and it can be difficult to drill. Regular drills dig in too fast and can cause cracks, but thick blocks may not have this problem. You can get drills with special angles for acrylic. You have to drill or cut slowly or the material will melt and stick to the drill or saw blade. Then it binds up.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register