Latest Discussions : Plumbing

mainlydave1

07:09AM | 01/03/07
Member Since: 01/02/07
2 lifetime posts
I have an older 3 handle shower faucet set up. I recently purchased replacement valves and diverter and installed them into the existing housing. The problem is, the diverter does not shut off the water to the shower head completely. Also, the diverter does not seem to stop when turned counter clockwise. I have looked very carefully at the diverter, and it is identical to the old one. I noticed that in the back of the diverter housing in the shower wall that there was a 1/4 square hole, I did not know if this is something that can be used to adjust the way the valve seat of the diverter sits. Help!

mainlydave1

10:37AM | 01/03/07
Member Since: 01/02/07
2 lifetime posts
No I did not. I thought if anything I would have problems with the hot and cold stems not the diverter.


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register