01:02PM | 01/29/07
Member Since: 01/28/07
1 lifetime posts
The celing outlet has one 3-conductor wire running to the wall outlet (black, white, red, ground). I hooked up the celing fan's white to outlet's white, the ground to ground and then ceiling fan's black to black. I also hooked the fan's light wiring (blue) to the outlet black.


Gnd --> Gnd

White --> White

Black --> Black

Blue --> Black

At the wall there are two 3-conductor wires running into the outlet. I'm trying to install a new switch with a dimmer slider. The light works when the switch is turned on, it even dims. But when the fan is on and the dimmer is lowered, the fan motor slows down as well. I'm thinking that I should have hooked the blue ceiling fan wire to the red ceiling outlet wire. And then that red wire to the switch.

Right now the wire that comes from the ceiling has it's white wire connected to the second white wire. The red is not used. The gnd is hooked to the switch. The black is connected to the switch. The second wire's black is hooked to the switch and the red is not used.

Does anyone know if hooking the blue to the red and the connecting the red to the switch is the right way to go to solve my dimming motor issues?


02:22PM | 01/29/07
Member Since: 04/25/05
1915 lifetime posts
It sounds like power comes from the switch to the receptacle(s). And at the receptacle they are "split" so that the wall switch controls 1/2 of the duplex receptacle and the other half is always hot.

Is this correct? The problem with this that you are not suppose to use dimmer on a receptacle. The reason is that things other than a light might be plugged into that receptacle.

But there might be a fix for this.

At the switch how many wires and what is connected to what?

Typicall the black would be the always hot and the red the switched hot. But yours seems to be different, not wrong, just different.


07:03AM | 01/31/07
Member Since: 03/31/05
265 lifetime posts
At the ceiling fan you should connect the white to white, black to black, and blue to red.

At the switch, for the cable from the ceiling, connect the white to the white from the "non-ceiling" cable, the red to the switch, and the black to the black from the "non-ceiling" cable along with a short pigtail that will connect to the switch. Leave the red from the "non-ceiling" cable disconnected.

All bare and green wires are connected together.

This will control the light from the switch and allow control of the fan from the pull chain.
Click to reply button
Inspiration banner


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button


Post new button or Login button

To test the boundaries of small-footprint living, interior designer Jessica Helgerson moved her family to a 540-square-foo... Filling an underutilized area beneath the stairs is a smart way to save space. Doing so with a stash of wood, however, is ... The Audubon Society inspired wallpaper in this Adirondack-styled mudroom will get you in the outdoor mood. Grab your coat ... Chalkboard paint opens up endless possibilities for customizing your dresser time and time again. Use chalk to label the c... A fireplace in the bathroom creates the ultimate setting for relaxation. Homeowners often choose electric or gas over wood... This roomy boot tray made from punched metal stands up to all the elements. Station it in your mudroom or at your back doo... There’s nothing like a new set of cabinet hardware to refresh a room. The possibilities are endless: Go modern, rustic, or... FLOR tiles are an affordable way to customize a carpeted floor covering for any space. Make anything from runners to wall-... Chalkboard paint features prominently in this elegant yet unpretentious headboard design. Add a new message daily to reflec... Salvaged boards in varying widths and colors make up the dramatic accent wall in this attic space. The high-gloss white of... The indecisive homeowner need not fret over choosing one (or even two) cabinet colors. The kitchen cabinets in this artist... Incorporate nature into your lighting scheme by securing a dead tree in a concrete mold and draping your pendant lamp from... Simple and striking, a couple of pieces of "lovingly used" furniture creates a special kind of charm. A weathered chair fo... First dress up your metal shelves with a coat of paint in an accent color that complements your kitchen decor. Then arrang... Dark wood shelving and a matching upholstered bench keep this closet sleek and refined. The large window brightens the sub...
Follow banner a
Newsletter icon Flipboard glossy Facebook Twitter Pinterest Youtube Rss icon