Latest Discussions : Flooring & Stairs

dan60510

04:35AM | 03/16/04
Member Since: 03/14/04
6 lifetime posts
I want to install travertine in front of my fireplace. The rest of the room is getting hardwood. Should I just run the plywood underlayment all the way up to the fireplace, or would you recommend a non-flammable underlayment in front of the fireplace?

The fireplace is a pre-fab wood-burning. The bottom of the opening is about six inches higher than the floor.

floorguyforyears

06:55PM | 03/16/04
Member Since: 03/15/04
28 lifetime posts
I wouldn't be concerned about the underlay being fireproof...the stone won't burn and wouldn't get hot enough to ignite anything under it. Be more concerned that you're providing enough support for the stone to prevent cracking. I would recommend that you use a backerboard such as Wonderboard or Hardibacker for the simple fact that they will provide much more stability than a plywood underlay. Hope this helps.


heddinger

02:17PM | 11/27/09
Member Since: 11/26/09
1 lifetime posts
I have a similar question. I have an insert in my pre-fab fireplace. The front of the stove extends out beyond the front of the fireplace abot eight inches.The front of the stove is approximately seven inches above the sub floor. I used a hearth pad with risers to support the front of the stove. Both pads had tiles on top of wood. Both pads had the wood burn out from the heat. So my question is if I put hardiboard on the sub-floor and then either poured a concrete hearth or had a piece of granite cut, would this be safe?


Post a reply as Anonymous

Photo must be in JPG, GIF or PNG format and less than 5MB.

Reply choose button

Anonymous

Post new button or Login button
Register